Description
Smart dimmer controls LED drivers and meters energy use
The smart dimmer Shelly Dimmer 0/1-10V PM Gen4 fits in a wall box, behind the wall or in a ceiling structure, requires a neutral wire and connects via Wi-Fi, Zigbee and Matter. It controls LED drivers with a 0–10 V or 1–10 V input and supports both current sourcing and current sinking control. The relay output switches the LED driver supply at up to 13 A and reports the load’s voltage, current and power.


Control from a wall switch, the app and smart home platforms
The S1 and S2 inputs take your existing switch or push buttons: the device works in single-switch, single-button or dual-button mode. With two buttons, one brightens the light and the other dims it. The settings cover minimum and maximum brightness, transition speed, power-on brightness and a night mode that lowers brightness during chosen hours. It can be controlled from the Shelly Smart Control app, the built-in web interface, and through Home Assistant, Amazon Alexa, Google Home and Samsung SmartThings. It also works on a local Wi-Fi network only.
Automation and Zigbee network extension
The firmware has 20 schedules, 20 webhooks (URL actions) with up to 5 URLs each, and scripting and MQTT support for building automation. In Zigbee mode the device acts as a repeater that extends the Zigbee network range; indoor Zigbee range is up to 100 m. Over Bluetooth 5.0 the device relays data from Bluetooth devices to the Wi-Fi network.
Installation in a wall box with a neutral wire
Installation is done by an electrician with the circuit breaker switched off. The device’s + output goes to the LED driver’s Dim+ terminal and the − output to Dim−, the live wire to the L terminal, and the neutral wire to the N terminals of both the device and the LED driver. The O relay output goes to the LED driver’s L terminal, and switches or buttons to the S1 and S2 terminals and the live wire. The terminals take 0.2–2.5 mm² solid wire or stranded wire with ferrules, stripped 5–6 mm, with insulation rated for at least 105 °C. The circuit must be protected by a breaker of up to 16 A with a B or C characteristic. To add it to a Zigbee network, press the reset button 5 times quickly and the device stays in pairing mode for 2 minutes; for Matter, scan the QR code in the box.



In the box
- Smart dimmer Shelly Dimmer 0/1-10V PM Gen4, 1 pc
- Matter QR code
- User and safety guide



Reviews
There are no reviews yet.