Description
Smart LED strip controller for white, RGB and RGBW strips
The wall-box smart LED strip controller Shelly Plus RGBW PM takes its power from a 12 or 24 V DC supply and connects via Wi-Fi and Bluetooth. It drives white, RGB or RGBW LED strips at up to 4 A per channel and 10 A in total, and measures the strip’s voltage, current and power.


Colour profiles and brightness settings
The controller has three profiles: RGBW, RGB and a light profile in which each channel is controlled separately, so four white LED strips can be dimmed independently. In the RGBW profile colour and white are controlled separately, with a choice of 16 million colours. The settings cover minimum and maximum brightness, button fade rate and night mode brightness.
Control from the app, by voice and with a switch
The controller is run from the Shelly Smart Control app and through Amazon Alexa and Google Home, and local automation actions work on the home Wi-Fi network. The input takes a switch, a button or a potentiometer. The firmware has 20 schedules, year-round advanced schedules, auto on/off timers, 20 webhooks (URL actions), scripting and MQTT. With the Shelly Plus Add-On interface, sensors can be added to the controller.
Connection, metering and Wi-Fi extension
The terminals take 0.1–1 mm² wire stripped 6 mm, with a maximum terminal torque of 0.2 Nm. The meter reads voltage from 0–24 V with ±5% accuracy and current from 0–10 A with ±10% accuracy, and detects a no-load state below 0.5 VA per channel. The controller repeats the Wi-Fi signal to extend the home Wi-Fi range and relays data from Bluetooth devices to the Wi-Fi network. The PWM (pulse-width modulation) frequency is 833 Hz, or 22 kHz in high-frequency mode.



In the box
- Smart LED strip controller Shelly Plus RGBW PM, 2 pcs


Reviews
There are no reviews yet.