Description
Clean air and a discreet solution for a built-in kitchen
The built-in cooker hood Elica CT23 GR/A/52 is designed to be installed in a kitchen wall cabinet to keep the worktop visually uniform and tidy. This compact grey unit, about 52 cm wide, removes vapours and odours produced during cooking with an airflow of up to 580 m3/h, and the LED lighting provides a clear view of the hob.
Thanks to energy class B and economical LED lighting, this model is suitable for everyday use in both smaller and medium-sized kitchens, helping to keep the room cleaner and free of odours without excessive energy use.
Main features
- Fully integrated installation – the cooker hood is designed to be hidden inside a cabinet, and suits modern kitchens where a uniform line of furniture without a separate visible canopy is preferred.
- Powerful airflow of up to 580 m3/h – a minimum airflow of 225 m3/h and a maximum of 580 m3/h let you choose a suitable extraction level, both for everyday cooking and for stronger vapour release.
- Energy-efficient operation – annual energy consumption is about 75 kWh and the overall energy class is B, which means reasonable energy costs in typical home use.
- Quiet operating range – the noise level is about 46 to 65 dB depending on the extraction speed, so the cooker hood does not become a dominant source of noise in the kitchen.
- Durable metal body – the grey finish on painted steel is neutral, fits easily with different kitchen furniture shades and styles, and withstands everyday use.
- Electronic control and multi-speed extraction – intuitive buttons make it easy to select the extraction speed, so you can quickly adjust the operation of the unit to the situation.
- Standard connection dimensions – the air outlet connection with a diameter of 150 mm suits common ventilation ducts, and the built-in non-return valve helps prevent cold air and odours from flowing back.
- Washable grease filter – the unit has a removable metal grease filter that can be cleaned regularly to maintain effective airflow and reduce the build-up of greasy dirt in the kitchen.
Compatibility, accessories and maintenance
The cooker hood is approximately 51.4 cm wide, 28.3 cm deep and up to 251 mm high, which makes it suitable for a standard wall cabinet about 60 cm wide. Before installation, it is worth measuring the inner dimensions of the cabinet and the position and diameter of the planned air duct, so that the Elica CT23 GR/A/52 fits correctly and the airflow is not obstructed.
As set at the factory, the unit is intended to work in extraction mode, where the air is led out through a ventilation duct. If extraction cannot be used in the kitchen, in many cases a separate carbon filter can be added to use the cooker hood in recirculation mode. For the choice and availability of a suitable charcoal filter, we recommend checking the product’s additional information or asking the seller for advice to make sure of correct compatibility.
The metal grease filter should be removed and washed regularly to maintain the efficiency of the unit. It can be cleaned with warm water and a suitable detergent, and if necessary a dishwasher can also be used, if the manufacturer’s instruction manual allows it. If you use a carbon filter, it needs to be replaced from time to time, because its ability to bind odours decreases over time.
Installation and use
The cooker hood is installed inside a kitchen cabinet so that only the lower working surface remains visible. During installation, the load-bearing capacity of the cabinet, the possibility of building the air duct and the electrical connection must be taken into account. The electrical connection should be left to a qualified specialist to ensure safety and compliance with requirements.
- Switch on the cooker hood a few minutes before cooking to create a stable airflow in the kitchen.
- Use the electronic control to select a suitable extraction speed according to the amount of vapours and odours.
- Leave the unit running for a short time after cooking has finished, to remove the remaining moisture and odours.
- Clean the grease filter regularly and follow the manufacturer’s instructions on maintenance intervals, to maintain the performance of the cooker hood and extend its life.
When to choose the Elica CT23 GR/A/52?
This cooker hood is a good fit if you want a kitchen where the appliance is hidden inside a cabinet, but the air cleaning is still effective. A built-in cooker hood is a good choice for smaller and medium-sized kitchens, where both space saving and a modest appearance are valued. The model with a grey colour and a painted steel body matches many kitchen furniture shades and offers a balance between performance, noise level and energy use.


Reviews
There are no reviews yet.