Description
An integrated cooker hood that keeps the kitchen air fresh and the hood out of sight
FABER Inka Lux Smart EV8 X A52/2 is a fully integrated cooker hood that is installed in a kitchen cabinet so that only a discreet stainless steel front edge remains visible. Thanks to an airflow of up to 690 m³/h, it effectively removes steam and cooking odours from small and medium-sized kitchens, and the LED lighting ensures good visibility on the hob without using too much energy.
Main features
- Fully integrated solution – the hood blends into the kitchen cabinet, leaving only a narrow stainless steel front edge visible and keeping the overall look clean and minimalist.
- Air power of up to 690 m³/h – well suited to everyday cooking and also copes with more intensive frying and boiling.
- Energy class B – annual energy consumption is approximately 68 kWh, which helps keep running costs under control.
- 52 cm integrated module – the compact size fits a typical upper kitchen cabinet, while the standard width of 60 cm matches such solutions.
- 150 mm exhaust outlet – a larger pipe diameter ensures smoother airflow and helps reduce noise and prevent backflow.
- LED lighting – energy-saving LED lamps provide even, clear light on the hob surface.
- Mechanical control – simple buttons make choosing speeds and switching the lighting on and off easy to understand, even for those who do not want complicated electronic menus.
- Noise level 49–68 dB – at lower speeds operation is relatively quiet, and at higher power the sound level is in line with the class of the hood.
Compatibility and uses in your kitchen
This cooker hood is intended as an extraction solution, where the air being cleaned is led out through a pipe. Thanks to the 150 mm connection, the appliance suits modern ventilation systems well, where a larger pipe diameter is preferred for better airflow. Before buying, it is worth measuring the inside dimensions of the kitchen cabinet and planning the route of the pipe so that there are as few turns and narrowings as possible.
If the ventilation shaft cannot be used, the hood can be used in recirculation mode. For this, Faber activated charcoal filter kits are available, which bind odours and direct the cleaned air back into the kitchen. As optional accessories, you can use, for example, the kits Charcoal filter F8 KIT with code 112.0157.240, Charcoal filter High Performance FHP8 KIT with code 112.0158.127 and Charcoal filter Long Lasting FLL8 KIT with code 112.0185.278, from which you can choose according to the intensity of use and the desired maintenance interval.
Thanks to the stainless steel finish, the hood matches various tones of kitchen furniture and appliances well, and the neutral design does not draw too much attention, suiting both modern and more classic kitchens.
Installation and everyday use
FABER Inka Lux Smart EV8 X A52/2 is installed in a kitchen cabinet according to the manufacturer’s instructions, by which the necessary openings are marked in the cabinet, the hood body is fixed and the exhaust pipe is connected. The appliance requires a correct electrical connection, and professional installation is recommended to ensure safety and reliable operation.
Use is simple – with the mechanical buttons you select a suitable ventilation speed according to the intensity of cooking and switch on the LED lighting of the work area. Lower speeds suit everyday cooking, while higher power helps remove strong odours quickly, for example when frying.
Grease filters should be cleaned regularly or replaced according to the manufacturer’s instructions, to maintain the efficiency of the hood and protect the motor from excess dirt. It is recommended to care for the metal surface with a soft cloth and suitable cleaning agents, avoiding strong abrasive substances that may scratch stainless steel.
When to choose the FABER Inka Lux Smart EV8 X A52/2?
This model is a good choice if you are looking for an integrated cooker hood that is installed in a kitchen cabinet and does not dominate the look, but still offers considerable air power of up to 690 m³/h. Energy class B, LED lighting and a stainless steel finish create a balance between efficiency, energy consumption and durability.
If you need a hood that fits a standard 60 cm upper cabinet, allows both extraction and, if necessary, recirculation mode, and has clear and convenient controls, the FABER Inka Lux Smart EV8 X A52/2 is a practical and well-thought-out solution for everyday cooking.


Reviews
There are no reviews yet.