Description
The built-in ELICA FOLD BL MAT/A/52 helps keep the kitchen air clean and odours under control
The built-in cooker hood ELICA FOLD BL MAT/A/52 is designed to be installed in a wall cabinet to remove steam and odours produced during cooking through a ventilation duct. The black matt finish and compact 52 cm width suit a modern kitchen well, while up to 580 m³/h air flow ensures efficient operation in small and medium-sized rooms.
Main features
- Built-in solution – the 52 cm wide cooker hood is designed to be installed in an upper kitchen cabinet, making the appliance almost unnoticeable from the front.
- Extraction version – the air is directed out through a connection to a ventilation duct, the duct diameter is 150 mm, which helps remove moisture and odours from the kitchen effectively.
- Extraction power 225–580 m³/h – suitable for everyday use over small and medium-sized hobs, allowing you to choose a weaker or stronger operating mode as needed.
- Noise level 46–65 dB – a range that is typical for built-in hoods and allows conversation in the kitchen while the appliance is running.
- LED lighting – energy-saving LED lamps give even light to the hob, reducing the need for separate worktop lighting.
- Energy class B – annual energy consumption of about 75 kWh helps keep running costs at a reasonable level.
- Electronic control – clear buttons for selecting speeds and light make use simple and logical.
- Non-return valve – the built-in so-called butterfly valve helps prevent cold air and odours from flowing back from the ventilation duct into the kitchen.
Fit for your kitchen and maintenance needs
ELICA FOLD BL MAT/A/52 is designed to be installed in a standard upper kitchen cabinet. The dimensions of the appliance itself are approximately 51.4 cm wide, 28.3 cm deep and up to 25.1 cm high, so it generally fits into 60 cm wide cabinets, where there is installation clearance on both sides. The air flow range of 225–580 m³/h makes the model a good solution for small and medium-sized kitchens where steam and odours need to be removed consistently.
The standard version of the cooker hood works in extraction mode, using a ventilation duct with a diameter of 150 mm. Models of the same series are often also used in recirculation mode with a separately sold charcoal filter, but in that case you should consult the seller about a suitable charcoal filter and accessories, as solutions may differ by country. This way you can make sure that the chosen configuration suits your kitchen’s ventilation system.
Regular maintenance helps preserve the efficiency of the cooker hood over a longer period. Washing the metal grease filters and cleaning the outer surfaces of the body with a soft cloth and non-abrasive products keeps the black matt surface attractive and prevents grease from building up inside the appliance.
Installation and use
The cooker hood is intended for professional installation in an upper kitchen cabinet, where secure fastening and a correct connection to the ventilation duct are ensured. It is advisable to follow the minimum distance between the hob and the underside of the hood given in the manufacturer’s instructions, to ensure both efficient operation and safety. The 150 mm duct connection allows the appliance to be connected directly to a ventilation duct of suitable diameter.
In use, you can choose between several speeds according to the intensity of cooking. A lower setting is suitable for boiling, while higher settings are suitable for frying or when there is strong steam and odour. The LED lighting can be switched on and off independently of the extraction function, so that it can also be used as additional light on the worktop when needed. After cooking, it is advisable to leave the cooker hood running at a lower speed for a few minutes to remove remaining steam and odours.
Ease of use and maintenance in everyday life
The electronic control panel makes using the cooker hood intuitive, as changing speeds and switching the light are clearly distinguishable. Thanks to the built-in design, the overall look of the kitchen remains uniform and mainly only the lower work surface with the light remains visible.
The grease filters should be removed and washed approximately every 1–2 months, depending on how often the hood is used. Warm water and dishwashing liquid are suitable for cleaning, or a dishwasher where permitted in the manufacturer’s instructions. Regular filter maintenance reduces grease build-up in the ventilation duct and helps keep the appliance’s noise level and extraction power stable.
If you use the appliance with a charcoal filter in recirculation mode, the carbon filter must be replaced periodically according to the manufacturer’s recommendations and your usage habits. This way the odour filtering stays effective over a longer period.
Why choose the ELICA FOLD BL MAT/A/52 cooker hood
If you want the kitchen hood to blend into the upper cabinet and remain discreet in view, while offering reliable extraction power, the ELICA FOLD BL MAT/A/52 is a versatile choice. The black matt finish, built-in installation, LED lighting and up to 580 m³/h air flow together with energy class B give a balance between performance, noise level and energy consumption. This solution suits especially those who prefer a practical and discreet cooker hood that supports everyday cooking without excessive attention or complicated extra functions.


Reviews
There are no reviews yet.