Description
Built-in cooker hood works in extraction and recirculation mode
Fitted into a kitchen cabinet, the built-in cooker hood MAAN Corona Touch Bis 60 is a 59.6 cm wide telescopic hood with a painted steel housing and a glass front. In extraction mode steam is led outside through a Ø 150 mm duct; in recirculation mode two Maan FDUEEL charcoal filters remove grease and odours before the air returns to the kitchen.
Touch keys and timer
Touch keys on the front of the drawer select one of three speeds and switch the light on and off. Holding a speed key for 5 seconds sets the timer to switch the fan off after 15 minutes. The fan switches itself off after running for two hours without input. A 3800 K LED light illuminates the hob.
Installation in a kitchen cabinet
For installation the cabinet bottom panel is removed and the hood is fixed to the cabinet sides or back. With side mounting the hood is fixed to two wooden blocks fitted in the cabinet; with back mounting it is fixed with two Ø 8 mm wall plugs to the cabinet back or the wall. The hood is 30.4 cm deep, 26.2 cm high and weighs 7.5 kg. Its lower edge must be at least 45 cm above an electric hob and at least 65 cm above a gas hob. In recirculation mode the cabinet has an opening through which the cleaned air leaves the cabinet.
Cleaning and care
Clean the hood inside and out with mild cleaning agents at least once a month or every 35 operating hours. The aluminium grease filters are dishwasher-safe or can be washed by hand after soaking for 15 minutes in water at 40–50 °C with washing-up liquid. Replace the charcoal filters every 6 months.
In the box
- Built-in cooker hood MAAN Corona Touch Bis 60, 1 pc
- Aluminium grease filters
- Wall plugs



Reviews
There are no reviews yet.