Description
Integrated cooker hood for a calmer and odour-free kitchen
The Elica CT23 BL MAT/A/52 integrated cooker hood is designed to be installed in a kitchen cabinet to remove the fumes and odours produced during cooking as unobtrusively as possible. The maximum airflow of up to 580 m3/h suits small and medium-sized kitchens well, while the energy class B appliance with a black finish blends in well with modern kitchen furniture.
Main features
- The fully integrated solution is installed in a wall cabinet so that the appliance is barely noticeable from the outside and the overall look of the kitchen furniture stays uniform.
- Efficient air exchange of up to 580 m3/h helps to remove fumes and odours quickly, which is important with frequent cooking.
- The duct out solution directs the air into the ventilation duct, which ensures better air exchange compared with the recirculation mode alone.
- LED lighting illuminates the hob evenly and is more energy-efficient than many traditional light sources.
- Electronic control lets you choose between different operating speeds and switch the lighting on and off with convenient buttons.
- Energy class B and an annual energy consumption of approx. 75 kWh offer a balance between performance and energy cost.
- The noise level of about 46–65 dB is within the usual range, which does not make the kitchen uncomfortably noisy.
- The 150 mm exhaust duct connection matches a widely used ventilation pipe size and simplifies connecting to the existing system.
Compatibility and maintenance
The Elica CT23 BL MAT/A/52 is made for kitchen furniture of standard width; its standard width is approx. 50 cm and the actual width is about 51.4 cm. The depth of about 28.3 cm and the maximum height of up to 251 mm allow the hood to be installed inside most common wall cabinet modules. The hood is intended primarily for connection to a ventilation duct with a diameter of 150 mm.
The appliance uses removable metal grease filters that catch the grease produced during cooking. It is recommended to clean the filters regularly to maintain the efficiency of the hood and reduce the build-up of odours in the kitchen. Warm water and a mild detergent are suitable for cleaning, and if the manufacturer’s instructions allow it, the filters can also be washed in the dishwasher.
If the ventilation duct cannot be used, the hood can be supplemented with suitable charcoal filters to work in recirculation mode. Charcoal filters are generally additional accessories purchased separately, and they need to be replaced from time to time according to the recommendations in the user manual.
Installation and use
The hood is installed in a kitchen cabinet so that mainly the lower working surface remains visible. For correct installation, it is important to observe the minimum height between the hob and the hood and the technical conditions given in the manufacturer’s instructions. This ensures safety and the best extraction result.
- Before installation, measure the opening in the cabinet and make sure that the width, depth and height of the cabinet module match the dimensions of the hood.
- When connecting the ventilation pipe, use a pipe with a diameter of 150 mm and make sure the air outlet is not blocked.
- When using it, choose a lower speed for lighter cooking and a higher speed for intensive cooking to keep steam and odours better under control.
- After use, let the hood keep running for a few minutes to remove residual moisture and odours, then switch the appliance off.
Why choose the Elica CT23 BL MAT/A/52?
The Elica CT23 BL MAT/A/52 combines a fully integrated design, decent airflow and LED lighting, which make everyday cooking more convenient. The duct out solution helps to remove moisture and odours from the kitchen efficiently, the black painted steel blends in well with modern furniture, and the electronic control makes use easy. If you are looking for an unobtrusively integrated cooker hood for a small or medium-sized kitchen, this model is a practical and balanced choice.


Reviews
There are no reviews yet.