Description
Managed PoE network switch with eight PoE+ ports
The GS110TP is a managed PoE+ network switch whose eight RJ-45 ports run at 10/100/1000 Mbit/s. It also has two SFP slots for fibre connections. Switching capacity is 20 Gbit/s and the MAC address table holds 8,000 entries.
PoE+ power of 30 W per port
All eight copper ports supply up to 30 W to IEEE 802.3at, so a WiFi access point, VoIP phone or IP camera is powered over the same network cable. The shared PoE budget is 55 W across all active PoE+ ports. PoE power can be switched on and off by a schedule.
Management and network features
By default the switch is configured through its web browser interface; with an Insight subscription it can also be managed from the NETGEAR Insight app and the Insight Cloud portal. Up to 64 VLANs, IGMP snooping, link aggregation, STP, QoS by 802.1p and DSCP, access control lists and 802.1X authentication can be set. Port mirroring and a cable test are also available.
Getting started
The switch also works without configuration: connect power, the network and your devices. Its DHCP client is on by default and the network’s DHCP server assigns an IP address, which the NETGEAR Insight app, Switch Discovery Tool or Smart Control Center finds. Without a DHCP server the switch address is 192.168.0.239 and the computer must be in the same subnet.
Power and operating conditions
The supplied power adapter runs on 100–240 V AC at 50–60 Hz. LEDs show power, LAN, activity, PoE, link and speed. The switch operates at 0–40 °C, 0–95% relative humidity and up to 3,000 m altitude.
In the box
- NETGEAR GS110TP network switch
- Power adapter
- User manual





Reviews
There are no reviews yet.