Description
Dual-tower CPU air cooler with seven heat pipes and two fans
The DeepCool ASSASSIN IV carries heat from the processor through seven 6 mm heat pipes into two black-coated fin towers, with air driven through them by a 140 mm and a 120 mm fan. The TDP rating states how much processor heat the cooler can remove, and in Performance mode it is 280 W.
Two operating modes on one switch
A switch on the cooler selects Quiet or Performance mode. In Quiet mode noise is up to 22.6 dB(A) and the 140 mm fan runs at 500–1450 rpm. In Performance mode noise is up to 29.3 dB(A) and the 140 mm fan runs at 500–1800 rpm. The fans connect to the motherboard with a 4-pin PWM connector, through which the motherboard controls their speed by pulse-width modulation.
Room for tall memory modules
For tall RGB memory modules the 120 mm fan frame can be fitted at two heights. On Intel LGA2066 and LGA2011 platforms the memory clearance is 63 mm. The cooler is 164 mm tall.
Installing the CPU cooler on Intel and AMD motherboards
The mounting kit fits Intel sockets LGA1851, LGA1700, LGA1200, LGA1151, LGA1150, LGA1155, LGA2066, LGA2011-v3 and LGA2011 and AMD sockets AM5 and AM4. On an Intel board, fit the backplate, screw on four standoffs and fix the two mounting bars with the nuts using the supplied screwdriver. Hole 2 of the bar is for LGA1851 and LGA1700, hole 1 for LGA1200 and LGA115X. Then apply thermal paste to the processor, peel the protective film off the cooler base and fix the cooler to the bars.
In the box
- cooler with two fans
- Intel backplate and mounting plate
- mounting bars for Intel and AMD sockets, 2 of each
- standoffs, screws and mounting nuts
- DM9 thermal paste in a syringe, spatula and cleaning wipe
- screwdriver









Reviews
There are no reviews yet.