Description
Hose timer for automatic watering through one hose from a garden tap
The RainPoint ITV105 hose timer is a single-zone timer with an LCD screen and buttons that fits on a garden tap and opens the water to one 3/4″ garden hose. Once set up, the screen shows the time and the start of the next watering, and watering runs automatically on schedule.

Setting up automatic watering with the dial and screen
The dial selects SET CLOCK, START TIME, HOW LONG or HOW OFTEN, and the + and – buttons set the value. Watering duration can be set from 1 minute to 3 hours 59 minutes and the frequency to every 1–12 hours or every 1–7 days. In the OFF position watering stops and the settings are kept.


Rain delay and manual watering
Rain delay postpones watering by 24, 48 or 72 hours, after which the original schedule continues. The MANUAL button starts an extra watering of 1 minute to 8 hours, and the set schedule is kept. When the batteries run low, the timer closes the valve automatically so the water does not keep running.


Installation
Turn off the garden tap, wrap sealing tape around the tap thread and screw the timer onto the tap by hand, with the screen as upright as possible. Then wrap tape around the outlet thread, screw on the garden hose and turn the tap on after programming. The timer fits a tap with a BSP 3/4″ or 1″ thread and works at a water pressure of 0.5–8 bar and a flow of up to 35 l/min. Before first use, activate the valve in manual watering mode.

Cleaning and care
Turn off the tap, remove the timer and rinse the inlet filter under running water. In manual watering mode the valve opens, so you can clean the water channel with a small brush. IP54 means protection against dust and splashing water from any direction; the timer works at 3–50 °C and should be stored indoors before frost.
In the box
- RainPoint ITV105 hose timer, 1 pc
- Sealing tape
- Washer
- Quick start guide
- User manual


Reviews
There are no reviews yet.