Description
Kitchen mixer tap with pull-out spray BLANCO LINEE-S
Kitchen mixer tap with pull-out spray BLANCO LINEE-S is a single-lever tap with the lever on top of the body and the spout leaving the body at the side. The colour is anthracite/chrome: the body and spout have an anthracite SILGRANIT-look finish, while the lever, the body ends and the spray head are chrome. With the pull-out spray you can direct water to every part of the sink.
Spout, spray and flow
The spout reach is 208 mm and the total height of the tap 281 mm. The maximum flow at 3 bar is 8.1 l/min, and the aerator gives an aerated jet. The spray hose is metal-sheathed and the pull-out is metal.
A weight on the hose pulls the spray back into the spout. A non-return valve (EN 1717) keeps used water from flowing back into the mains.
Installation and water pressure
The tap fits a 35 mm hole in the sink or worktop, with a mounting surface up to 40 mm thick. The base diameter is 46 mm. The flexible connection hoses are 500 mm long with a ⅜″ nut. In a stainless steel sink the stabilising plate gives the tap firm support.
A high-pressure (HD) tap is meant for a pressurised supply: the kitchen has wall valves for both cold and hot water, and hot water comes from a central system or an instantaneous water heater. The tap needs at least 1.0 bar and takes up to 10 bar and a water temperature of up to 70 °C. A low-pressure tap has three hoses, so the high-pressure tap goes only onto a high-pressure connection.
Installation needs pliers, 17, 19 and 22 mm spanners and a PZ2 screwdriver. Before connecting, let water run from the angle valves into a bucket to flush dirt out of the pipes. The spray hose connects with 19 and 22 mm spanners, and the hose weight is fixed with a PZ2 screw. Finally unscrew the aerator with a 17 mm spanner, let the water run and check the connections for leaks.
Finish and sink colour
The tap body is brass, and the SILGRANIT-look finish gives it the colour of the sink. BLANCO makes its SILGRANIT-look taps in the colours of its SILGRANIT sinks, so the anthracite tap matches an anthracite BLANCO sink.
Tap care
After use, dry the tap with a microfibre cloth. For limescale use a vinegar or citric acid solution: let it act briefly, then rinse it off. If limescale builds up in the aerator, unscrew it anticlockwise and soak it overnight in vinegar water or citric acid solution.
Clean with the soft side of a sponge and a chlorine-free cleaner. BLANCO states that spare parts for the tap are available for at least 10 years.
In the box
- Kitchen mixer tap BLANCO LINEE-S, 1 pc
- Flexible connection hoses, 500 mm, with ⅜″ nut
- Hose weight that pulls the spray hose back
- Stabilising plate for installation in a stainless steel sink
- Non-return valve (EN 1717)
Needed separately
With old water pipes a separate dirt filter is needed, which catches dirt from the pipes before the tap. BLANCO recommends fitting it between the angle valve and the tap hose, with two filters in series for high pressure.




Reviews
There are no reviews yet.