Description
Smart 2-zone irrigation controller for the garden tap with Wi-Fi gateway
The RainPoint HTV210B 2-zone irrigation controller fits on a garden tap and controls two outlets separately, so the lawn and the beds each get their own watering plan. The controller talks over Bluetooth 5.0 to the included HWG009WB Wi-Fi gateway, which brings watering control into the RainPoint Smart+ app even when you are away from home. The gateway and controller can be up to 60 m apart, depending on obstacles in between. The controller runs on four AA alkaline batteries.


Watering plans, rain delay and weather in the app
Each zone holds up to six watering plans with start time, duration and frequency, and a single watering lasts from 1 minute to 12 hours. Besides the irrigation mode there is an interval mode that mists plants in cycles. Rain delay pauses watering for 24, 48 or 72 hours, and the app shows the weather and the next watering time. The controller can be linked to Google Assistant or Amazon Alexa to control the valves by voice.



Installing on the garden tap
Turn off the tap, wrap sealing tape around the tap thread and screw the controller onto a 1″ or 3/4″ tap in an upright position so rainwater does not collect in the unit. Then wrap tape around the 3/4″ outlet threads, screw the hoses onto the outlets and turn on the tap. The gateway plugs into an indoor socket near the router and connects to a 2.4 GHz Wi-Fi network. For manual watering, press the zone button on the controller to open that zone’s valve.
Cleaning and care
Keep the inlet filter correctly fitted and clean, so the filter catches dirt from the water. Batteries are changed in the battery compartment on the back of the controller.
In the box
- Irrigation controller RainPoint HTV210B, 1 pc
- Wi-Fi gateway RainPoint HWG009WB, 1 pc
- Sealing tape, 1 pc
- User manual, 1 pc
- Quick setup guide, 1 pc


Reviews
There are no reviews yet.