Description
Temperature and humidity sensor that connects straight to your home Wi-Fi
The Shelly H&T Gen3 temperature and humidity sensor measures air temperature and humidity and sends readings through your Wi-Fi router straight to the app, without a separate smart hub. Besides the readings, the e-paper display shows the time, Wi-Fi signal strength and battery level.

Shelly app, web interface and MQTT
You can monitor and set up the sensor in the Shelly Smart Control app on Android and iOS or in a browser. The sensor also works on its own: the built-in web interface, MQTT and REST API connect it to other home automation systems. Webhooks, or URL actions, up to 10 with 2 URLs each, pass the reading to other devices. Connected to Google Home and Amazon Alexa you can ask for the reading by voice and build automations. Bluetooth 4.2 is used for adding the sensor and can be switched off.

Battery or USB-C power
The sensor runs on four AA batteries (LR6, 1.5 V) for up to 12 months or permanently from a USB-C adapter. Batteries and USB cable are bought separately.

Table or wall mounting
Open the back cover with a flat screwdriver and insert the batteries in two rows. When first powered the display shows SEt and the sensor stays in setup mode for 3 minutes, a short press of the reset button brings it back. For a table or shelf attach the stand; for a wall, mark the screw holes using the back cover or use a double-sided foam sticker. Use screws with a 5–7 mm head and a thread of up to 3 mm.

In the box
- Temperature and humidity sensor Shelly H&T Gen3, 1 pc
- Table stand


Reviews
There are no reviews yet.