Description
Inset stainless steel sink BLANCO TIPO 45 S Mini
The inset stainless steel sink BLANCO TIPO 45 S Mini is fitted into a worktop cut-out so that its rim rests on the worktop. The sink measures 605 × 500 mm, is 174 mm high and has a natural finish. The tap position is on the back edge of the sink. The sink can be installed with the drainer left or right of the bowl.
Installation in the worktop
The cut-out is 587 × 482 mm with a tolerance of +2/−1 mm and a corner radius of 15 mm. An inset sink can be fitted into worktops of almost any common material, laminate included. According to the side-view drawing, the drain outlet sits 300 mm below the worktop surface.
According to the installation instructions, the cut-out is marked on the worktop with a 15 mm corner radius and cut with a jigsaw. The cut edge is then cleaned, a continuous bead of silicone is applied round the cut-out and the sink is set into it. The fixing clamps are tightened with a PZ 2 screwdriver, working crosswise from opposite corners, and excess silicone is wiped off. The tap hole of this reversible sink is made during installation, because BLANCO does not factory-punch the tap hole on reversible stainless steel sinks without drain remote control.
Bowl and drain
The bowl corners have a radius of 80 mm. The drain has a stainless steel 3½″ basket strainer that is opened and closed by hand. The space-saving pipe of the waste kit runs the drain towards the back of the cabinet and leaves more room under the sink. BLANCO recommends this kit when a pull-out waste sorter goes under the sink.
Stainless steel and surface finish
The sink is made of 18/10 stainless steel, which contains 18% chromium and 10% nickel. The chromium forms a thin invisible protective layer that renews itself with oxygen. The first fine scratches on a new sink are normal, and many become less visible within a few days as the layer renews.
Reddish spots on the surface are rust carried over from other rusty objects or from the water pipes, and they wipe off. The natural finish keeps an even look when limescale and dirt are removed regularly.
Stainless steel sink care
For daily cleaning, use washing-up liquid and the soft side of a sponge, then rinse the sink and dry it with a soft cloth. A sink wiped dry after each use shows fewer small limescale spots. Vinegar essence diluted 1:10 removes limescale.
When weekly cleaning no longer removes stains, use a deep-cleaning agent suited to natural-finish stainless steel. To clean the basket strainer, put a level teaspoon of dishwasher powder on the closed strainer, pour about 250 ml of boiling water over it, let it work and scrub with a brush. Then lift out the strainer insert, clean the holes of the drain and rinse with clean water.
Abrasive cleaners, cleaners with chlorine or hydrochloric acid, bleach, silver baths and strong salt solutions left to act for long damage the surface, as do steel wool, metal scrapers and the scouring side of a sponge.
In the box
- Kitchen sink BLANCO TIPO 45 S Mini, 1 pc
- Waste and overflow kit with space-saving pipe
- 3½″ basket strainer, opened by hand
Needed separately
Connecting the sink to the drain takes one 1½″ trap. The BLANCO 137267 kitchen sink trap connects the waste kit to a Ø40 or Ø50 mm drain pipe and has a dishwasher connection. With a sink-cabinet waste sorter, the flat BLANCO 137287 trap fits, with a Ø50 mm outlet and two appliance connections. A kitchen tap is also bought separately.






Reviews
There are no reviews yet.