Description
Inset stainless steel sink BLANCO DANA 45
The inset stainless steel sink BLANCO DANA 45 sits in the worktop cut-out with its rim resting on the worktop. The finish is stainless steel, natural finish; the outer size is 480 × 500 mm and the height 167 mm. The bowl corners have a radius of 80 mm. The tap goes on the back edge of the sink, where the tap hole is made at the factory.
Installation on the worktop
The cut-out is 482 × 462 mm with a tolerance of +2/−1 mm and a corner radius of 15 mm. The sink also fits laminate worktops, as well as compact laminate, stone, glass, stainless steel and composite worktops. The waste outlet sits 283 mm below the top of the worktop.
After cutting, clean the edges of the cut-out and apply a continuous bead of silicone under the sink rim. Set the sink into the cut-out and tighten the fixing clips crosswise with a PZ 2 screwdriver. Wipe off any squeezed-out silicone straight away. A dishwasher connects to the separately sold trap.
Bowl, drain and overflow
The bowl drain has a 3½″ basket strainer that is opened and closed by hand. The bowl has an overflow connected to the waste and overflow set. The set’s space-saving pipe routes the waste towards the back of the cabinet and leaves more room under the sink. BLANCO recommends this pipe when a pull-out waste sorter goes under the sink.
Stainless steel and surface finish
The sink is made of 18/10 stainless steel, which contains 18% chromium and 10% nickel. Chromium and oxygen form a thin invisible protective layer on the steel that renews itself. The first fine scratches on a new sink are normal: as the layer renews, many of them become less visible within a few days. Reddish spots on the surface are rust carried over from other rusty objects or water pipes and can be wiped off.
Stainless steel sink care
To avoid small marks, wipe the sink after each use with a soft cloth and a mild cleaning agent and dry it. Small marks are usually limescale that collects dirt and comes off with a damp cloth. For stubborn limescale, use a descaling stainless steel cleaner with a sponge suitable for stainless steel. A ceramic sink deep-cleaning powder also suits a natural-finish stainless steel sink.
To clean the basket strainer, put a level teaspoon of dishwasher powder on the closed strainer and pour about 250 ml of boiling water over it. Let it work, brush the strainer clean, lift out the insert, clean the holes of the waste bowl and rinse with clean water. Keep chlorine or hydrochloric acid cleaners, long-acting strong salt solutions, steel wool and scrapers away from the sink.
In the box
- Kitchen sink BLANCO DANA 45, 1 pc
- Waste and overflow set with space-saving pipe
- 3½″ basket strainer, opened by hand
Needed separately
To connect the sink to the drain, you need one trap. The BLANCO 137267 kitchen sink trap connects the waste set to a Ø40 or Ø50 mm drain pipe and has a dishwasher connection. With a waste sorter under the sink, the flat BLANCO 137287 trap fits, with a Ø50 mm outlet and two appliance connections. The kitchen tap is bought separately.






Reviews
There are no reviews yet.