Description
PETG filament for FDM printers
SUNLU PETG is a tough PETG filament that withstands water and chemicals and, according to the manufacturer, suits most FDM printers on the market. The filament is wound on a detachable, reusable spool.

Tough material for impact-resistant parts
Thanks to its toughness, PETG breaks less often during printing, and printed parts withstand impact and bending without cracking. Tensile strength is 48 ± 10 MPa and notched Izod impact strength 3 ± 1 kJ/m².

Material that withstands water and chemicals
Its water and chemical resistance makes PETG suitable for parts used in humid environments. In the manufacturer’s tests the material withstands weak acids and bases, deionised water and petrol well.

Print settings
The recommended nozzle temperature is 240–260 °C with print speeds up to 300 mm/s. The bed temperature is 60–70 °C, the bed needs no special treatment and the cooling fan stays on during printing. Retraction distance is 0.8–1.2 mm at 30–40 mm/s, and PVA can be used as support material.
Drying and storage
The drying temperature for the filament is 60–65 °C. Keep the spool out of direct sunlight, as UV light may turn the material yellowish.






Reviews
There are no reviews yet.