Description
The 2.5 Gigabit PoE injector UACC-PoE+-2.5G powers a UniFi PoE+ device from the mains, leaving the PoE switch’s power budget for other devices. Its output is 48 V DC at 0.65 A.
PoE injector for powering UniFi PoE+ devices
The injector has two shielded RJ45 sockets: the data input takes the network connection and the PoE+ output sends data together with power into the cable. PoE power (power over the Ethernet cable) uses two pairs, positive on pins 4 and 5 and negative on pins 7 and 8. The data link supports 10, 100 and 1000 Mbit/s and 2.5 Gbit/s, and the efficiency is above 87%.
Surge and overcurrent protection
The injector protects in common and differential mode, with a clamping voltage of 11 V on the data line and 60 V on the power line. The power line withstands a 1500 A surge discharge (8/20 µs) and the data line a 36 A peak pulse current (10/1000 µs), with a response time below 1 ns.
Installation and use
The injector can be wall-mounted using the mounting holes on its back. It connects to the mains with an earthed power cord, for an input of 100–240 V at 50/60 Hz. A status LED on the top shows the power state, and the operating temperature is 0–40 °C.
In the box
- PoE injector UACC-PoE+-2.5G
- earthed power cord







Reviews
There are no reviews yet.