Description
Wireless access point for a dual-band Wi-Fi 6 network
The Wi-Fi 6 wireless access point U6-Mesh delivers data rates up to 4.8 Gbit/s on the 5 GHz band and up to 573.5 Mbit/s on the 2.4 GHz band. The 5 GHz radio uses 4 × 4 MU-MIMO, sending data to several devices at once, and according to the manufacturer the access point serves more than 300 concurrent clients. The coverage area given by the manufacturer is 140 m².
Power over the network cable to PoE 802.3af
The unit has one 1 Gbit/s RJ45 port that carries both data and power: PoE, power over the Ethernet cable, to the 802.3af standard, within 44–57 V DC. It can be powered by a UniFi PoE switch or by the 48 V PoE adapter in the box. Maximum power consumption is 11.4 W.
Mesh, roaming and management in UniFi Network
The access point supports wireless meshing, band steering and roaming to 802.11r, 802.11k and 802.11v, so a phone or laptop moves over to the nearest access point as you walk. Up to 8 network names can be created per radio, networks can be separated with 802.1Q VLANs (virtual LANs), and WPA3 and WPA-Enterprise are available for encryption. Guest devices can be isolated from each other and speed can be limited per user. Management requires UniFi Network version 6.0.45 or later, over Ethernet and Bluetooth.
Mounting on a wall, desk or pole
The supplied mount fits the access point to a wall, a desk or a pole. The polycarbonate and aluminium housing is rated IPX5, protected against water jets from any direction, and works from −30 to 60 °C at 5–95% relative humidity, non-condensing. A white or blue LED shows the status, and a reset button restores the factory settings.
In the box
- UniFi U6-Mesh wireless access point
- PoE adapter 48 V, 0.32 A
- Mount for wall, desk and pole







Reviews
There are no reviews yet.