Description
Wireless access point for wall mounting
The wall-mounted wireless access point Ubiquiti U7 In-Wall uses the Wi-Fi 7 (IEEE 802.11be) standard in two bands: 2.4 GHz and 5 GHz. In the 2.4 GHz band the data rate is up to 688 Mbit/s. According to the manufacturer, it covers an area of up to 115 m².
Antennas, MU-MIMO and roaming
The housing contains 4 internal antennas with a gain of up to 8 dBi and 4 spatial streams. With MU-MIMO the device sends data to several clients at once. Maximum transmit power is 23 dBm in the 2.4 GHz band and 24 dBm in the 5 GHz band.
Fast roaming to IEEE 802.11k, 802.11v and 802.11r keeps the connection as a user moves between access points. Band steering moves clients between the bands, and the device can also be used in a wireless mesh.
Network connection and PoE power
The device has 3 RJ-45 Ethernet ports: one on the back and two on the bottom edge. The Ethernet connection runs at up to 2.5 Gbit/s. Power comes over the Ethernet cable within a range of 42.5–57 V, and maximum power consumption is 13 W.
Network management and security
The device supports VLANs, Hotspot 2.0 and PPSK, which lets each user or device group have its own network password. A Wi-Fi schedule sets when the wireless network is on.
Housing and operating conditions
The housing is aluminium and polycarbonate, with a status LED on the front and a reset button on the bottom edge. The device operates at −30 to 40 °C and 5–95% relative humidity.
In the box
- Ubiquiti U7 In-Wall wireless access point
- mounting kit









Reviews
There are no reviews yet.