Description
PoE network switch with eight PoE+ ports
The Esperanza ENS106 is a PoE network switch with 8 PoE+ and 2 uplink ports, all RJ45 ports running at 10/100 Mbit/s. The PoE+ ports support IEEE 802.3af and 802.3at, so an IP camera, Wi-Fi access point or other PoE device receives power over the same Ethernet cable. Each port delivers up to 30 W per port and all PoE ports together have a total power of 96 W.
Modes set by DIP switches
Two DIP switches on the front panel turn on VLAN mode and PoE+ extend mode, which increases the PoE+ reach to up to 300 metres. The PoE ports also support a Watchdog function.
Data transfer and uplink ports
Switching capacity is 2 Gbit/s and the forwarding rate is 1.488 Mpps. The ports detect their speed automatically and Auto MDI/MDI-X works with both straight-through and crossover cables. IEEE 802.3x flow control evens out traffic.
Power and operating conditions
The switch runs on 220–240 V AC and its standby consumption is 4 W. The housing measures 135 × 195 × 40 mm and the switch operates at −20 to 55 °C. Keep the ventilation openings on the sides of the housing clear during operation.





Reviews
There are no reviews yet.