Description
AIO CPU liquid cooler with a frosted ARGB pump block
The LE240 WH V2 is a white AIO CPU liquid cooler whose frosted pump cover diffuses the ARGB lighting into an even glow. You can customise the pump block logo plate or leave it blank.
Pump, fans and leak protection
The motherboard controls the speed of the three-phase pump through a 4-pin PWM cable between 2500 and 3400 rpm, so you can slow the pump down to reduce noise. The hydro bearing fans spin at 500–2100 rpm, deliver up to 75.89 CFM airflow and 2.53 mmAq static pressure, with noise up to 31.6 dB(A). The pump and fan lighting connects to the motherboard’s 5 V 3-pin ARGB header. When internal pressure rises above atmospheric pressure, an internal valve releases it and reduces the risk of leaks.
Installation
On Intel sockets, set the backplate pins to the LGA 1851/1700 or LGA 1200/115X position, place the backplate behind the motherboard and screw on the socket standoffs. Screw the Intel or AMD brackets onto the pump block, then place the pump on the CPU and secure it with four nuts. The included screws also let you mount the radiator on the front panel of the case. Connect the pump to the AIO_PUMP or W_PUMP header and the fans to CPU_FAN or CPU_OPT.
Compatibility
The mounting hardware fits Intel sockets LGA 1851, LGA 1700, LGA 1200, LGA 1151, LGA 1150 and LGA 1155 and AMD sockets AM5 and AM4. The aluminium radiator measures 282 × 120 × 27 mm and the tubes are 410 mm long.
In the box
- Liquid cooler: pump block and radiator with two pre-installed fans
- Intel backplate and two Intel brackets
- Two AMD brackets
- Standoffs for LGA 1851/1700, LGA 1200/115X and AM5/AM4, 4 of each
- Four mounting nuts and four bracket screws
- 8 radiator screws and 8 front panel mounting screws
- Splitter cable






Reviews
There are no reviews yet.