Description
AIO CPU liquid cooler with three fans and ARGB lighting
This ARGB-lit AIO CPU liquid cooler carries heat from the processor to an aluminium radiator cooled by three fans. The case needs a 360 mm radiator mount: the radiator measures 402 × 120 × 27 mm and the tubes are 410 mm long.
Pump and fans
The three-phase motor of the fourth-generation pump runs at up to 3100 rpm, and the microchannel copper base is thick. Pump noise is 19 dB(A). The motherboard controls the FC120 fans through a 4-pin PWM connector between 500 and 2250 rpm; airflow is up to 85.85 CFM and, at full load, noise up to 32.9 dB(A). The manufacturer rates the fluid dynamic bearing fans at 50,000 hours.
ARGB lighting and rotatable logo plate
The infinity mirror on the pump cap shows two light rings. ARGB (addressable) lighting lets each LED be controlled individually: it connects to the motherboard’s 3-pin 5 V ARGB header, and effects can be synchronised with supported software. When no controller is detected, a default rainbow effect runs. The independently rotatable logo plate allows the pump to be mounted in any orientation, and the spare blank plate takes your own design.
Compatibility
The mounting brackets fit these CPU sockets:
- Intel: LGA 2066, LGA 2011-v3, LGA 2011, LGA 1700, LGA 1200, LGA 1151, LGA 1150 and LGA 1155
- AMD: sTRX4, sTR4, AM5 and AM4
In the box
- pump and radiator with tubes
- 3 × FC120 A-RGB PWM fan
- Intel and AMD mounting brackets
- blank logo plate for your own design





Reviews
There are no reviews yet.