Description
Mobile TV stand with shelf and glass base
This mobile TV stand with shelf stands on an 800 × 500 mm base plate made of 10 mm thick glass. Under the base plate are four rubber castors, two of them with brakes. The TV rails fit a TV whose mounting holes are 75–600 mm apart horizontally and 75–400 mm vertically.
Shelf and cable management
The 42 × 35 cm shelf attaches to the column for media devices and its height can be set between 60 and 980 mm. The height of the telescopic column is locked with a knob on the side of the column. The TV cables are held in the column channel by five cable clips.
Installation and maintenance
You need a Phillips screwdriver and a spirit level; the hex keys and the spanner are included.
- Join the two parts of the column and lock the height with the knob.
- Fit the shelf brackets to the column using a level, and fix the column to the base plate.
- Screw the four castors under the base plate.
- Fit the shelf to the brackets and the VESA adapter to the top of the column.
- Fix the rails to the back of the TV: use spacers for a TV with an uneven back; a TV with a flat back needs none.
- Hang the TV on the adapter, secure it with screws and route the cables into the column channel with the clips.
To turn the TV into portrait position, loosen the adapter screws, rotate the TV by 90° and tighten the screws again. Check at least every three months that the stand is secure and safe to use.
In the box
- base plate
- two-part telescopic column
- shelf and 2 shelf brackets
- VESA adapter and 2 TV rails
- 2 castors and 2 castors with brakes
- 5 cable clips
- column locking knob and 2 column covers
- screws and washers for the base, shelf and adapter
- TV screws M4, M5, M6 and M8, spacers and washers
- 2 hex keys and a spanner








Reviews
There are no reviews yet.