Description
Silk PLA filament with a three-colour transition for decorative prints
The three-colour silk PLA filament SUNLU Silk PLA+ Tri-Color gives models a high-gloss silk-like surface on which red, yellow and blue alternate with the viewing angle. The maker designed it for decorative items, figurines, toys, accessories and light fittings.

Key features
- PLA+ material and ±0.02 mm diameter tolerance
- Nozzle temperature 210–230 °C
- Bed temperature 50–60 °C, recommended surface a textured PEI plate without pre-treatment
- Tensile strength 50 ± 4 MPa and heat deflection temperature 57 ± 3 °C
- Shrinkage 0.1–0.3% and density 1.23 g/cm³

Print settings and storage
The maker recommends a retraction length of 0.8–1.2 mm at 30–40 mm/s. The drying temperature given is 50 °C. Keep the spool out of sunlight, as UV light can turn the material yellow.








Reviews
There are no reviews yet.