Description
TTL camera flash with 100 Ws output for Nikon cameras
Made for Nikon cameras, the TTL camera flash Godox V100 N is a round-head on-camera flash with a maximum flash energy of 100 Ws in manual mode. Nikon i-TTL automation sets the output from a pre-flash, and in manual mode the output can be set in 81 steps. You change settings on the 2.3-inch colour touchscreen or with the buttons and select dial.

Round head and detachable SU-1 sub flash
The round-lens head gives even, soft fill light. For bounced light the head turns 0–330° horizontally and −7° to 120° vertically, and the zoom sets the coverage automatically from the lens or manually between 28 and 105 mm. The supplied SU-1 sub flash lights the foreground even when the main head points at the ceiling. The built-in 2 W LED modelling light has 10 brightness levels.

Battery, recycling and cooling
The lithium battery (7.2 V, 2980 mAh) gives about 400 full-power flashes, and the recycle time is about 1.7 s. The cooling system allows 70–100 consecutive full-power flashes. You charge the battery through the USB-C port, and the indicator glows red while charging and green when full.
TTL flash in the wireless Godox X system
The built-in Godox X 2.4 GHz radio system lets the flash work as a master or a slave at up to 100 m. As a master, the V100 N controls its own flash and four slave groups (A–D) on 32 channels, and a radio ID of 01–99 separates your system from other flashes on the same channel. As a slave it is fired by a Godox X flash trigger such as the X2T, XProII or X3.

Sync and flash modes
High-speed sync (HSS) lets you use the flash at every shutter speed of the camera. First- or rear-curtain sync can also be selected. In Multi mode the flash fires up to 100 times during one exposure at up to 100 Hz. Flash exposure compensation covers ±3 stops in one-third-stop steps.
Use
To mount it, hold the hot-shoe lock button, turn the lock left, slide the flash into the camera’s hot shoe and turn the locking ring right to tighten. To fit the battery, slide it into the compartment in the direction shown until it locks, and press the battery release button to remove it. To attach the SU-1 sub flash, switch the V100 N off, align the SU-1 parallel to the external flash port and press down until it clicks. The flash can also be fired through a 2.5 mm sync cord.

Cleaning and storage
You clean the flash with a dry soft cloth. Let the flash cool down fully before storage. For longer storage, charge the battery to about 50%, repeat this at least every 6 months and keep a removed battery at 0–40 °C.
In the box
- Camera flash Godox V100 N, 1 pc
- SU-1 sub flash, 1 pc
- lithium battery 7.2 V, 2980 mAh, 1 pc
- charger, 1 pc
- USB-C charging cable, 1 pc
- mini stand, 1 pc
- storage bag, 1 pc
- user manual, 1 pc







Reviews
There are no reviews yet.