Description
USB audio interface with four MIDAS preamps
A USB audio interface with four microphone inputs The Behringer U-PHORIA UMC404HD accepts both XLR and 6.35 mm plugs in its front panel combo jacks, so each input can take a microphone, a line device or an instrument. The LINE/INST switch on each channel selects line or instrument level, and the PAD switch reduces the input level of a strong source.
Zero-latency monitoring and outputs
The MIX button blends the input signal with playback from the computer, so you hear the incoming sound in your headphones and at the MAIN OUT outputs with zero latency. Studio monitors connect to the MAIN OUT outputs on the rear panel, which have both XLR and 6.35 mm TRS jacks. Additional speakers can be connected to the PLAYBACK outputs A and B, and the MONITOR A/B switch routes the signals of outputs 3 and 4 to the headphones. The STEREO/MONO switch sets input monitoring to mono.
MIDI and computer connection
The 5-pin MIDI IN and OUT jacks on the rear panel are for a MIDI keyboard, controller or other MIDI device, and the MIDI lights show data traffic. The audio interface connects to the computer through a type B USB 2.0 port, and on a Mac it works without a driver.
Setup, use and cleaning
- On a Windows computer, download the U-PHORIA USB driver from the Behringer website and install it.
- Connect the audio interface to the mains with the supplied power adapter and to the computer with the supplied USB cable.
- In your recording software, select the UMC404HD as the audio and MIDI interface.
- Connect microphones or instruments to inputs 1–4 and set their level with the GAIN knobs. If the CLIP light comes on, turn the GAIN knob of that channel anticlockwise until the light goes out.
- When recording with a condenser microphone, switch on +48 V phantom power on the rear panel.
- Adjust headphone volume with the PHONES knob and monitor speaker volume with the MAIN OUT knob.
Clean the audio interface with a dry cloth only.
Included in the box
- Behringer U-PHORIA UMC404HD USB audio interface
- Power adapter
- USB cable


Reviews
There are no reviews yet.