Description
The X-Sense CO03D carbon monoxide detector detects danger early and shows the level on an LCD display
Carbon monoxide is invisible and odourless. The X-Sense CO03D carbon monoxide detector helps detect it quickly and gives a clear audible and visual warning. The sensitive Figaro electrochemical sensor monitors the carbon monoxide level in the range of 30 to 999 ppm and shows the instantaneous reading on the display, so that you can take the right steps before the level becomes dangerous.
Key features
- The real-time LCD display shows the current CO level and status messages, which simplifies assessing the situation at any moment.
- The highly sensitive electrochemical sensor also detects low concentrations, thereby reducing the risk of underestimating danger.
- A clear alarm of ≥ 85 dB together with a red LED makes the warning signal clearly audible even when asleep.
- Intelligent alarm logic responds to concentration and time, which helps avoid false alarms.
- 3 × AA replaceable batteries ensure independent operation and simple maintenance without connecting to the mains.
- Test and silence give the option to check operation and mute the alarm for approximately 9 minutes.
- EN 50291 and UL 2034 certificates confirm compliance with strict safety requirements, and the device has BSI and CE approval.
Reliable CO detection for everyday protection
The X-Sense CO03D monitors the carbon monoxide level around the clock. The Figaro electrochemical sensor is made for lasting operation, to detect CO even at low concentrations and show it on the LCD display. Continuous monitoring makes it possible to react in good time and reduces the health risk before a critical level develops.
Warnings on the display and with light signals
The clear display shows the CO level in real time and the LED lights signal the status. Green indicates normal operation, yellow warns of a low battery or an error and red means alarm mode. Together with an audible signal of ≥ 85 dB, the warning is easy to notice even in a noisy environment.
Replaceable AA batteries
For power, 3 × 1.5 V AA alkaline batteries are used, which are included in the set. The low battery warning signals in good time the need to replace the batteries. This way the reliability of the sensor is preserved without having to replace the device or build a power connection.
Customised alarm criterion
The sensor triggers the alarm according to the detected concentration and time. At about 30 ppm after up to 120 minutes, at 50 ppm after 60 to 90 minutes and at 300 ppm in approximately 3 minutes. This logic reduces false alarms and warns quickly when the level is truly dangerous.
Test and silence
A regular test gives certainty that the sensor works as intended. The silence function allows the alarm to be temporarily switched off for approximately 9 minutes in cases where the CO level has dropped below the dangerous limit or when the situation is under control.
Certified safety and a clear design
The device meets the EN 50291 and UL 2034 standards and has received BSI and CE approval. The compact size of 110 × 110 × 37 mm and the modern look fit different interiors without the sensor standing out too much.
Everyday use and maintenance
The sensor works independently and does not need the mains, so it is suitable for installation in living spaces, near bedrooms and on every floor. The LCD display allows you to conveniently follow the instantaneous reading and the LEDs give a quick overview of the operating status. Maintenance is limited to periodic testing and replacing the batteries when a low battery warning is shown.
The set includes a wall or ceiling mount and installation accessories, so additional equipment is usually not needed. According to the conditions, the device works in a temperature range of 4 to 38 °C and at a relative humidity of 10 to 85 percent in a non-condensing environment.
Installation and instructions for use
Install the sensor in living spaces and the sleeping area in a visible place on the wall or ceiling according to the manual. It is recommended to install one on every floor and near heating appliances, keeping a reasonable distance from direct air flow and fumes. Avoid installing in a bathroom, a very damp environment, next to ventilation openings or open windows and in places where the temperature or dust may be extreme. Test the device regularly with the test button and replace the batteries immediately when the low battery warning lights up. In case of an alarm, ventilate the room, leave for a safe place and follow official instructions.
In the box
- X‑Sense CO03D carbon monoxide detector × 1
- Mounting bracket × 1
- Screws × 2
- Wall plugs × 2
- 1.5 V AA alkaline batteries × 3
- User manual × 1
A safer home with an informed decision
The X-Sense CO03D offers a balance between accurate detection, a clear warning and simple maintenance. Real-time readings on the display, a ≥ 85 dB alarm and compliance with the EN 50291 and UL 2034 requirements help reduce CO-related risks. The set includes everything needed for installation, and the replaceable AA batteries keep running costs under control. If you want a practical and reliable solution for CO detection, this sensor is a sure choice.

Reviews
There are no reviews yet.