Description
3D printer with direct drive extruder and Klipper firmware
The Longer LK10 3D printer prints with FDM technology and has a 225 × 225 × 265 mm build volume. Driven by a Klipper mainboard, it prints at up to 500 mm/s, and the high-flow direct drive extruder delivers up to 25 mm³/s. The nozzle heats to 300 °C and the bed to 110 °C, so the printer takes PLA, PETG, ABS, ASA and TPU. Layer height can be set from 0.1 to 0.4 mm.





Automatic levelling and vibration calibration
An eddy current sensor measures the bed and the printer sets the nozzle-to-bed distance automatically. The calibration menu runs automatic levelling, bed and nozzle PID tuning and vibration calibration, which reduces ghosting and wavy walls at high speed. Models are printed on a gold PEI plate that sits on the magnetic bed before levelling.


Control from the touchscreen, Wi-Fi and LAN
The printer is operated from a 4.3-inch colour touchscreen with menus in nine languages. Files can be sent over Wi-Fi, LAN or on a USB stick, and OrcaSlicer connects to the printer by IP address as an Octo/Klipper host. After a power cut the printer resumes from the same layer height, and when the filament runs out it pauses and alerts you. When printing several parts at once you can skip a single part, with up to 32 parts on the plate.


Assembly of gantry frame and base
Fix the gantry frame to the base with four M5 × 45 screws and the 4 mm hex key, the screen with two M4 × 20 screws and the filament holder on top of the frame with the 2.5 mm key. Then connect the X-axis and two Z-axis motor cables, secure the print head ribbon cable with two M3 × 6 screws and tie the cables with cable ties. Before first start-up, adjust play in the print head, Z-axis and bed with the eccentric nuts, check belt tension and set the voltage switch at the back to your local mains voltage, 230 V by default.
Cleaning and maintenance
Wipe the printer body with a dry cloth with the power off, and remove filament residue from the nozzle before printing. Remove residue from the build plate after heating the bed above 60 °C; wiping the plate with alcohol improves adhesion.
In the box
- 3D printer Longer LK10, 1 pc
- Touchscreen, 1 pc
- Filament holder, 1 pc
- Power cable, 1 pc
- Test filament
- Wrenches
- Hex keys
- USB stick, 1 pc
- Cable ties
- Screws M5 × 45, 4 pcs
- Screws M4 × 20, 4 pcs
- Screws M3 × 6, 2 pcs

Reviews
There are no reviews yet.