Description
3D printer for fast printing with automatic calibration
The filament-based Anycubic Kobra 4 3D printer uses FDM technology, in which the nozzle melts a plastic strand and lays down the part layer by layer, and its build volume is 260 × 260 × 260 mm. The build plate is a PEI-coated spring steel sheet and, according to the manufacturer, the printer assembles in about 15 minutes.


Automatic levelling and flow calibration
LeviQ 3.0 automatic levelling measures the build plate at 49 points with repeatability below 0.02 mm and corrects X, Y and Z axis deviations itself. Dynamic flow calibration matches the filament feed to the print speed in real time. A built-in accelerometer finds resonance frequencies and compensates for vibration, reducing ghosting on the print surface.


Fast printing and quiet operation
The recommended print speed is 300 mm/s, the maximum 600 mm/s and acceleration up to 20,000 mm/s². According to the manufacturer, the Benchy test model takes about 14 minutes. The noise level is up to 48 dB in standard mode and up to 45 dB in quiet mode.

Interchangeable nozzle and camera monitoring
The quick-swap hotend’s factory-fitted 0.4 mm nozzle is hardened steel, and 0.25, 0.6 and 0.8 mm nozzles also fit: the smaller for fine detail, the larger for printing bigger parts faster. The nozzle heats up to 300 °C and the heated bed up to 100 °C. The 720p camera and AI monitoring detect foreign objects and tangled filament during printing, alert you and record a time-lapse video on request.

Control through the app and slicer software
You control the printer from the 3.5-inch touchscreen, the Anycubic APP or the Anycubic Slicer Next software. Files travel over dual-band Wi-Fi (2.4 and 5 GHz) or LAN, and you choose between cloud mode and the local network. The software has ready material profiles, PrusaSlicer and Cura also work as slicers, and model files are in STL or OBJ format.
Installation
Before connecting power, release the heated bed transport locks with the H2.5 hex key, replacing them with the decorative covers, and the six Z-axis fixing screws with the H2.0 key. The frame fixes to the base with eight M5 × 30 screws, tightened top to bottom with the H4.0 key. Under the base you connect the Z-axis, X-axis, print head and camera cables, secure them with the clips and fit the cable cover. The purge wiper slides onto the left side of the frame and fixes with one M3 × 8 screw.

Cleaning and maintenance
The lead screw, linear rods, guide rails, idler pulley and extruder wheel need regular lubrication: oil for the rail, rods and pulley, grease for the lead screw and extruder. Check plastic and rubber parts and replace silicone wipers and Teflon tubes as needed. Clean the fan with compressed air and wipe the camera lens with a lint-free cloth and isopropyl alcohol.
In the box
- Anycubic Kobra 4 3D printer (frame and base), 1 pc
- power cord
- spool holder, 1 pc
- purge wiper
- M5 × 30 screws, 8 pcs, and M3 × 8 screw, 1 pc
- Teflon tube, 1 pc
- application brush
- filament samples
- grease
- nozzle cleaning needle
- hex keys 4.0, 2.5 (2 pcs), 2.0 and 1.5 mm and a magnet
- decorative covers, 4 pcs
- cable cover

Reviews
There are no reviews yet.