Description
Multi-colour 3D printer for four filament spools
The multi-colour 3D printer Anycubic Kobra X prints with FDM technology: filament pushed through a heated nozzle is laid down layer by layer. Two spool holders on top of the frame feed four filaments through four PTFE tubes to the print head. The printer takes rigid PLA and PETG, flexible TPU and ABS, so one model can be printed in several colours and materials.



Automatic levelling and an even first layer
On first start-up the printer runs automatic levelling, motion vibration calibration and active noise cancellation calibration. The LeviQ 3.0 system measures the build plate, so the first layer comes out even without manual calibration. The heated bed reaches up to 100 °C and the layer height can be set from 0.08 to 0.28 mm.


Quick-change nozzle and RFID filament recognition
The print head has a single 0.4 mm nozzle that can be swapped quickly thanks to the quick-release hotend. When the spool tag is read by the RFID reader in the lower left corner before loading, the screen shows the filament material and colour. With actively noise-cancelled motion control the noise level is up to about 48 dB.


Remote control from the app and AI camera
The printer connects to Wi-Fi on 2.4 GHz and 5 GHz and can be linked to the Anycubic app and Anycubic Slicer to start prints remotely. The built-in 720p camera uses AI to detect failed layers, so-called spaghetti errors and foreign objects left on the build plate. After a power cut you can resume printing where it stopped. Models can be prepared in AC Slicer, PrusaSlicer or Cura from STL and OBJ files.

Assembly of base and gantry frame
The printer ships as two main parts: the base and the gantry frame. After placing the build plate on the heated bed, release the Z-axis locks with the H2.0 hex key before connecting power, then fix the frame to the base with eight M5 × 30 screws using the H4.0 key. Next connect the axis motor, print head and camera cables under the base and fit the purge wiper, the spool holders and the four PTFE tubes by their numbers.
Cleaning and maintenance
Grease the lead screw and the extruder wheel, and oil the guide rail, linear rod and idler pulley, which keeps metal parts rust-free. Check plastic and rubber parts regularly and replace the silicone wipers and PTFE tubes when needed. Clean the fan with compressed air and the camera lens with a lint-free cloth and isopropyl alcohol.
In the box
- 3D printer Anycubic Kobra X, 1 pc
- Power cord, 1 pc
- Spool holder, 2 pcs
- Spool holder shaft, 4 pcs
- Purge wiper, 1 pc
- Screws M5 × 30, 8 pcs, and M3 × 8, 1 pc
- Cable clip, 1 pc
- PTFE tube, 4 pcs
- Build plate, 1 pc
- Filament samples
- Grease
- Nozzle cleaning needle
- Hex keys 4.0, 2.5, 2.0 and 1.5 mm and a magnet
- Decorative cover, 2 pcs
- Cable cover, 1 pc
- Application brush, 1 pc




Reviews
There are no reviews yet.