Description
Filament dryer with adjustable temperature and automatic mode
The Creality SpacePi X4L filament dryer removes moisture from 3D printing filament, which otherwise causes air bubbles in the print and weakens layer adhesion. The dryer takes 1.75 mm and 2.85 mm filament and keeps the material dry both before and during printing.


Temperature, time and humidity on the touchscreen
On the LCD touchscreen you set the temperature and drying time: temperature from 45 to 75 °C and time from 1 to 48 hours. In automatic mode the dryer selects the parameters itself. Temperature and humidity sensors in the chamber monitor conditions continuously, and the screen shows chamber humidity in real time.

Double-insulated housing
The double insulation keeps the heat in the chamber. With the chamber at 75 °C, the outer housing is about 60 °C. The housing is made of ABS, PA and PC plastic.

Compatible spools and filaments
The chamber holds one- and two-kilogram spools up to 200 mm in diameter and 150 mm wide. You can set temperature and time to suit the material, for example to dry PLA, PETG or TPU.


In the box
- Filament dryer Creality SpacePi X4L, 1 pc



Reviews
There are no reviews yet.