Description
Multi-colour 3D printer with CFS system for up to four colours
The cube-frame multi-colour 3D printer Creality K2 SE Combo prints with FDM technology from 1.75 mm filament, with a build volume of 220 × 215 × 245 mm. The CFS module (Creality Filament System) in the set holds four filament spools at once and changes filament by itself during printing.


Build volume and layer height
Layer height can be set from 0.1 to 0.35 mm, and print accuracy is 100 ± 0.1 mm. During the self-check the printer tunes its vibration-damping Input Shaping. The build plate is a spring steel sheet with an epoxy coating on both sides, and both sides can be printed on.

Extruder and filaments
The dual-gear direct drive extruder also feeds flexible TPU 95A filament. The printer works with PLA, PETG, TPU 95A and PLA-CF filament; the 0.4 mm nozzle heats up to 300 °C and the bed up to 100 °C.

Automatic levelling and self-check
The build platform is levelled automatically when print calibration is selected. On first start a self-check of about 13 minutes tests nozzle and bed heating, the fans and levelling.

Control and file transfer
The printer is controlled from a 3.97-inch touchscreen, where nozzle and bed temperatures can be set and files selected. Files can be printed from a USB stick, sent over the local network from the Creality Print slicer or from the Creality Cloud app. After a power cut the printer resumes printing, and the filament sensor detects run-out.

CFS module and automatic filament change
The module reads the colour and remaining amount of Creality RFID filament by itself; data for other filament is entered on the screen. When a spool runs out, the module starts feeding the next one. A humidity indicator shows when the desiccant needs replacing, and up to four CFS modules can be connected to the printer.


Installation and first start
The touchscreen is connected to the base ribbon cable and clicked into the base plate slot; the spool holder is fitted to the back. The power switch is set to 230 V by default. On first start remove the three transport screws as shown on screen, then set language, network and time zone and link the printer to a Creality Cloud account. For the CFS module a filament buffer is fitted to the back of the printer and connected with PTFE tubes and two 485 cables.
Cleaning and maintenance
Clean the printer with a dry cloth after switching it off and remove dust and filament residue from the guide rails. Remove filament from the extruder with the supplied tools right after printing while it is still warm. Lubricate the guide rods and lead screws regularly and calibrate the build platform every 300 print hours or after replacing the nozzle or platform.
In the box
- 3D printer Creality K2 SE Combo, 1 pc
- CFS module, 1 pc
- Touchscreen, 1 pc
- Filament sample, 1 pc
- Spool holder, 1 pc
- Power cable, 1 pc
- Wrench and screwdriver set, 1 pc
- Cutting pliers, 1 pc
- Nozzle cleaner 1.2 mm, 1 pc
- M6 socket spanner, 1 pc
- Double connector with screw, 1 pc
- PTFE tube 2 m, 1 pc
- 485 cable, 2 pcs
- Quick guide, 1 pc





Reviews
There are no reviews yet.