Description
Multi-colour system for automatic feeding of four filaments
The Anycubic ACE 2 Pro multi-colour system fits the Kobra 3, Kobra 3 V2, Kobra 3 Max, Kobra S1, Kobra S1 Max and Kobra X printers and gives the printer four filaments. With four ACE 2 Pro units connected you can print in up to 16 colours.



Fast feeding with brushless motors
Four independent brushless motors and a buffer mechanism control filament feeding and retraction in each channel. Filament loads at 50 mm/s and a colour change takes about 56 seconds. The filament inlets are made of wear-resistant alumina ceramic.

Filament drying during printing
The ACE 2 Pro dries filament while you print, at up to 65 °C. A temperature and humidity sensor monitors the chamber, and during drying the system opens a solenoid valve to let moist air out. A silicone ring seal keeps the chamber closed. You see temperature and humidity in the Anycubic app, the slicer and on the printer screen. Drying is optimised for PLA, PETG, PVB and TPU. With the lid closed the noise level is below 48 dB, and about 55 dB during active drying.
Filament recognition and automatic spool switching
The system recognises RFID-tagged Anycubic filament automatically and, with an internet connection, syncs its type and colour to the printer. When a spool runs out, the printer switches to a new spool and continues printing. The ACE 2 Pro estimates the remaining filament from the spool chip rotations and the length of filament fed.

Use and maintenance
Place a spool in the ACE 2 Pro chamber and push the filament end into the feeding port: the system detects the filament and starts pre-feeding automatically. Then select the active slot in the printer’s Filament menu and set the filament type and colour. To unload filament, use the Remove Filament function on the printer screen, or push the unload handle in if needed. To clear a jam, you can take the external feed channels apart without tools thanks to the quick-release design.

In the box
- Multi-colour system Anycubic ACE 2 Pro, 1 pc



Reviews
There are no reviews yet.