Description
Shelly 5-terminal adapter for The Pill for quick sensor connection and I/O expansion
If you need a simple way to connect sensors and buttons in The Pill projects, the Shelly 5-terminal adapter for The Pill does the job. The module brings out 3.3 V logic level I/O terminals, plus a separate 5 V power and GND, to build prototypes and smart solutions without complicated wiring. Support for digital signals, one analogue input and popular temperature sensors creates a basis for reliable home automation and IoT experiments.
Key features
- 3 configurable 3.3 V I/O terminals let you connect buttons, switches and sensors without additional logic converters.
- Separate 5 V and GND terminals for powering low-consumption accessories and clean wiring.
- Support for an analogue input and digital I/O, to read voltages or monitor status signals.
- Compatible with well-known sensors such as DS18B20 and DHT22, to measure temperature and humidity.
- Quick connection thanks to a clear terminal layout, which shortens set-up time and reduces the risk of errors.
- The extension module created specifically for The Pill makes the main hardware interfaces conveniently accessible.
- A compact solution for building and testing IoT and home automation prototypes.
Shelly 5-terminal adapter for The Pill
The Shelly 5-terminal adapter for The Pill is a compact and practical accessory that expands the device’s capabilities with 5 V power, GND and three 3.3 V I/O terminals. Support for digital signals, an analogue input and the popular temperature sensors DS18B20 and DHT22 makes the module a suitable choice for home automation, IoT solutions and prototyping. It is a convenient way to connect sensors, buttons or other control elements quickly and correctly.
Functionality and use
The 5-terminal extension module helps to use the potential of The Pill to the full, making all the most important hardware interfaces easily accessible. It suits both creating automation scenes and testing new configurations, offering a stable and clear connection point for work.
Flexibility of configuration
Three configurable I/O terminals let you adapt the work of the module as needed, from simple sensor readings to more advanced control scenarios. Support for different signal types and easy integration with additional components make the solution suitable both for small installations and for smart system projects.
Compatibility, signal levels and practical recommendations
The module is intended for use only with the The Pill device and brings out its main hardware interfaces. You can connect buttons, switches and sensors with 3.3 V logic. DS18B20 and DHT22 sensors are supported, and one analogue input, with which you can measure voltage changes or monitor the sensor output.
The I/O terminals work at a 3.3 V logic level. Connect only components that suit this voltage, and watch the polarity with both the 5 V supply and the signal wires. If necessary, use a level converter if your sensor or element works at a different voltage level, to avoid damaging the device.
Installation and instructions for use
Switch The Pill off and plan the connections in advance. Connect the sensors and buttons to the corresponding I/O terminals, take accessories that need power to the 5 V and GND terminals, and check the strength of the connections. Keep the wires short and properly labelled, to reduce noise and simplify maintenance. After switching on, set the I/O directions and functions in The Pill software according to the sensor or switch used, and test each channel separately.
In the set
- Shelly 5TerminalAdd 5-terminal extension module for The Pill
Ready to create and test
If you want faster connection and flexible expandability in The Pill projects, this adapter is a practical choice. Clear terminals, 3.3 V I/O and support for common sensors help you get the solution working quickly and reduce the time spent on set-up.


Reviews
There are no reviews yet.