Description
1 to 5 splitter with a 3.5 mm plug for DS18B20 sensors for the Shelly The Pill
If you need accurate temperature information from several measuring points at once, the 1 to 5 splitter for the Shelly The Pill is a practical solution. This accessory connects up to five DS18B20 temperature sensors to the sensor port of one device and lets you do multi-point measurement at home, in the office or in an industrial environment without adding separate modules. The 3.5 mm plug ensures plug-and-play use and tidy cabling, which makes installation and everyday work smooth.
Key features
- Up to 5 sensors on one port: bring together five DS18B20 temperature sensors into the one sensor port of The Pill and monitor several areas at the same time.
- Plug-and-play 3.5 mm connection: connect and start measuring without additional set-up or special skills.
- Compatible with The Pill by Shelly: designed to work with The Pill device stably and predictably.
- Tidy cabling: one combined connection simplifies cable management and reduces confusion.
- Multi-point measurement: suits monitoring the temperature profile of a home, office and industrial premises.
- Time and cost saving: you expand the number of measuring points without installing additional devices.
Shelly 1 to 5 splitter with a 3.5 mm plug
The 1 to 5 splitter with a 3.5 mm plug is a practical accessory for The Pill by Shelly that lets you connect up to five DS18B20 temperature sensors to one port at the same time. This way you can do multi-point temperature monitoring at home, in the office or in industry without expanding the installation. The plug-and-play solution makes connecting quick and intuitive, and the whole system works as one tidy connection, which simplifies set-up and everyday use.
Simple plug-and-play connection and temperature control
The 3.5 mm plug makes installation quick and easy to understand. No additional set-up or special knowledge is needed: connect the sensors and start measuring right away. This way you save time and avoid installation problems. The ability to monitor several points at once gives a clear advantage: you detect temperature changes earlier and can react to them in real time, without extensively rebuilding the whole system.
Compatibility, accessories and maintenance recommendations
According to the manufacturer’s information, the splitter is compatible with the The Pill by Shelly device. The supported sensors are DS18B20. Support for other devices or sensors is not confirmed in the descriptions, so use it with The Pill or check the suitability of your device before buying. The sensors are not included in the set and must be bought separately. If you use third-party DS18B20 sensors, make sure the wiring diagram and polarity of the 3.5 mm plug are correct.
For maintenance, keep the plugs and sockets clean and dry, avoid excessive cable tension and check the security of the connections from time to time. If you need longer connections, use quality extension cables and avoid unnecessary transitions, to preserve the reliability of the measurements.
Installation and use
1. If necessary, switch the device off for safety. 2. Connect the 3.5 mm plug of the splitter to the sensor port of The Pill. 3. Connect up to five DS18B20 sensors to the sockets of the splitter. 4. Switch the device on and make sure the measuring points are displayed in the interface of the device. 5. If you wish, mark the locations of the sensors and route the cables with clips or conduit, to avoid pulling and breaking.
In the set
– 1 × Shelly 1 to 5 splitter with a 3.5 mm plug – The user manual may be digital on the manufacturer’s page – DS18B20 sensors are not included in the set
Ready for multi-point temperature measurement
If you want to add several measuring points to The Pill device without making the installation more complicated, this splitter is a sure choice. It brings together up to five sensors in one socket, reduces the number of connections and keeps the cabling in order. The result is a clear overview of the temperature in different places and faster reaction to changes without installing additional modules.


Reviews
There are no reviews yet.