Description
Cable marking printer for electrical and telecom installations
For marking wires in electrical, telecom and industrial installations there is the NIIMBOT C1 cable marking printer, which prints 9 mm wide, connects to a phone over Bluetooth and runs on a 2600 mAh battery. In thermal transfer the print head transfers ink from a ribbon to the material, and the 300 dpi markings are clear and fade-resistant.

Marking tubes and heat-shrink sleeves for different cables
The printer prints on both marking tubes and heat-shrink sleeves. Supported sleeves have a cross-section of 0.5–25 mm² and tubes a diameter of 1–8 mm, so one device covers several cable types. The marker length can be set between 10 and 100 mm.


Material loading and automatic functions
The feed system works without a sleeve guide, so loading the material is quick and printing can start straight away. Before printing, the printer cleans dust from the material, clamps the tube itself and keeps the ribbon pre-tensioned, which reduces the risk of ribbon damage. Automatic numbering creates consecutively numbered markers, and the printer half-cuts or fully cuts the material while numbering continues without a break.


Print speed for large installations
The printer prints up to 38 markers per minute at a marker length of 20 mm, which shortens marking of large installations.

Power from battery or mains
With its built-in 2600 mAh lithium-ion battery the printer prints up to 200 m of material without external power. It prints while charging, so longer jobs can run on mains power.

Marker design in the smartphone app
You design and edit markers in the smartphone app, which has ready-made industry templates and cloud storage for reusing earlier templates. Up to 10 phones can connect to the printer over Bluetooth at once, so several workers can send designs to print.








Reviews
There are no reviews yet.