Description
Cordless pruning saw with branch jaw clamp for cutting branches and wood
The Einhell GE-GS 18/150 Li-Solo cordless pruning saw is designed for cutting branches and, with the appropriate blade, also saws wood, iron, non-ferrous metals and plastics. The further you press the switch, the higher the stroke rate, up to 2,600 strokes per minute; the stroke length is 20 mm.
Branch jaw clamp and cutting depth
When cutting branches, the branch jaw clamp guides the saw straight through the branch. The cutting depth is 80 mm with the clamp and 100 mm without it. The belt clip lets you hang the saw on your belt, keeping both hands free.
Changing the blade and fitting the branch jaw clamp
Before changing the blade, switch the saw off and remove the battery. Open the safety guard, turn the ring on the blade holder, slide the blade into the slot and pull it to check it is held firmly. To fit the branch jaw clamp, push it into the lower mount of the soleplate and lock it with the latching bolt.
Cleaning and storage
Remove the battery before cleaning. Clean the saw after each use with a clean cloth or blow it out with low-pressure compressed air; to protect the plastic parts, use only water and mild soap. Store the saw in a dark, dry, frost-free place at 5–30 °C.
In the box
- Einhell GE-GS 18/150 Li-Solo cordless pruning saw with branch jaw clamp
- 2 wood saw blades
- operating and safety instructions
Battery and charger are not included.











Reviews
There are no reviews yet.