Description
Telescopic cordless pole saw for cutting branches from the ground
This Power X-Change telescopic pole saw is designed for cutting tree branches while standing on the ground. The length of the aluminium telescopic pole adjusts steplessly between 88 and 182 cm, the motor head tilts to 7 positions and the main handle to 4 positions. For horizontal cuts, the saw attachment turns 90° on the motor head.
Assembly and fitting the chain
Push the pole onto the handle housing up to the bead, tighten it with the assembly nut, fit the additional handle and hook the shoulder strap carabiner into the strap attachment. To fit the chain, undo the chain wheel cover fixing knob, lay the chain in the groove of the guide bar, guide it around the chain wheel and refit the cover hand-tight. The chain is tensioned without tools with the tensioning knob until it can be lifted about 2 mm in the middle of the bar, and only then is the fixing knob tightened fully. The saw attachment locks onto the motor head when the arrows are aligned and it is turned clockwise.
Automatic chain lubrication and shoulder strap
The chain is oiled automatically from the 125 ml oil tank; one fill lasts 20 minutes on average, depending on breaks and load. The telescopic pole is extended by loosening the lock nuts anticlockwise, pulling out the tubes and tightening the nuts clockwise. The shoulder strap is adjusted so that the strap attachment sits at waist height, and the quick-release buckle lets you put the tool down quickly.
In the box
- Handle
- Telescopic pole with motor unit
- Shoulder strap with quick release
- Saw attachment
- Guide bar
- Saw chain
- Bar cover
- Operating instructions and safety instructions
Battery and charger are not included.




Reviews
There are no reviews yet.