Description
Cordless pole saw for delimbing high branches
The Einhell GC-LC 18/20 Li T is a cordless pole saw with a 20 cm guide bar that runs on a Power X-Change 18 V Li-ion battery and is sold without battery and charger. It cuts branches up to 19.5 cm thick.
Shaft assembly and shoulder strap
The shaft consists of a handle tube, an extension tube and a motor tube joined with locking nuts; the extension tube can be fitted or left out. The shoulder strap clips onto the shaft with carabiners, and its buckle can be squeezed to set the tool down quickly. The saw starts when you press the switch lock and then the on/off switch.
Chain tensioning and automatic oiling
Chain tension is set at the tensioning screw with the 4 mm end of the supplied multi-function tool; with the correct tension the chain can be lifted about 2 mm at the middle of the bar. The chain is oiled automatically from a 70 ml tank with a MIN and MAX window, and one filling lasts about 15 minutes on average. Check the chain tension at least every 10 minutes during work, especially with a new chain.
Cleaning and care
Remove the battery before cleaning. Clean the tensioning mechanism with compressed air or a brush, keep the handles free of oil and wipe the housing with a damp cloth and, if needed, a mild detergent. For longer storage, empty the oil tank and keep the saw in a dry, dark, frost-free place at 5–30 °C with the bar cover fitted.
In the box
- Handle tube
- Extension tube
- Motor tube
- Guide bar Oregon 084LNEA041, 20 cm
- Saw chain Oregon 90PX033X
- Bar cover
- Shoulder strap
- Multi-function tool SW13 / 4 mm


Reviews
There are no reviews yet.