Description
Brushless cordless chainsaw for felling and cross-cutting
This 36 V cordless chainsaw is designed for felling trees and for cross and rip cuts in trunks, branches, wooden beams and boards. The two Power X-Change batteries mount on the side of the saw and a three-LED indicator shows their charge level. The saw has an OREGON guide bar and chain.
Fitting the guide bar and chain
Undo the chain wheel cover fixing knob, remove the cover and lay the chain in the groove of the guide bar. Place the bar and chain on the saw, guide the chain around the chain wheel and refit the cover with the knob. Then tension the chain with the tensioning knob until it can be lifted 3–4 mm in the middle of the bar, and only then tighten the fixing knob fully. As the chain warms up and lengthens, check the tension every 10 minutes while working.
Automatic chain lubrication and chain brake
The chain is oiled automatically from the 230 ml oil tank, whose level shows in a window on the side. One fill lasts 15 minutes on average, depending on breaks and load. In a kickback the chain brake, triggered by the front hand guard, stops the chain in less than 0.1 seconds. When the switch is released, the motor brake stops the chain.
Cleaning and care
Clean the chain tensioning mechanism regularly with compressed air or a brush and keep the handles free of oil. The housing can be cleaned with a damp cloth and mild washing-up liquid when needed. For longer storage, empty the oil tank, dip the chain and bar briefly in an oil bath and wrap them in oil paper.
In the box
- Cordless chainsaw Einhell GP-LC 36/40 Li BL
- Guide bar with adapter plate
- Saw chain
- Bar cover
- Operating instructions and safety instructions
Battery and charger are not included.



Reviews
There are no reviews yet.