Description
Undermount stainless steel sink BLANCO ETAGON 700-U
The undermount stainless steel sink BLANCO ETAGON 700-U is fixed from below into the worktop cut-out, so its rim sits under the worktop. It has one large bowl without a drainer; the outer size is 740 × 440 mm and the height 199 mm. A step inside the bowl creates a second working level: the two stainless steel ETAGON rails rest on it and can hold a chopping board or a colander.
Undermount installation
The sink suits a dense, continuous worktop of natural stone, composite or glass; wood and wood-based boards are unsuitable. The cut-out is 700 × 400 mm with a tolerance of +2/−1 mm and a corner radius of 35 mm.
For the fixing kit, holes of 5 mm diameter and 15 mm depth are drilled into the underside of the worktop, 27 mm from the cut-out edge. Silicone is applied to the rim before the sink is fixed, and the screws are tightened with a PZ2 bit. The tap goes into the worktop: the hole is 35 mm in diameter and is drilled 60 mm from the cut-out edge. The drain outlet sits 290 mm below the worktop surface.
Bowl, drain and overflow
The bowl drains through a 3½″ InFino basket strainer that is opened and closed by hand. The overflow is a covered C-overflow, flush with the bowl wall. The waste kit has a space-saving pipe that leads the drain towards the back of the cabinet and leaves more room under the sink. BLANCO recommends this pipe when a pull-out waste sorter is fitted under the sink.
Stainless steel and surface finish
The sink is made of 18/10 stainless steel with 18% chromium and 10% nickel. With oxygen, chromium forms a thin invisible protective layer on the surface that renews itself. Fine scratches on a new sink are normal and become less visible as the layer renews.
The surface has a satin polish with a fine texture and a warm undertone. Hot pots and long sunlight do not dull or discolour it. Reddish spots come from other rusty objects or particles from the water pipes and wipe off.
Stainless steel sink care
For daily cleaning, put a little washing-up liquid on the soft side of a sponge and clean along the grain. Circular movements can permanently change a satin surface. Then rinse the sink and dry it with a microfibre cloth. For limescale, use vinegar essence diluted 1:10 with water or BLANCO DailyClean+ (526305).
Once a month, clean the sink thoroughly: apply a hazelnut-sized amount of BLANCO DeepClean Stainless Steel (526306) with a sponge and polish along the grain. To clean the basket strainer, put a level teaspoon of dishwasher powder on the closed strainer, pour about 250 ml of boiling water over it, let it work and brush it clean. Keep abrasive cleaners, hypochlorite bleach, silver cleaning baths, cleaners with chlorine or hydrochloric acid, scratchy sponges and steel wool away from the sink.
In the box
- 2 stainless steel ETAGON rails
- Waste and overflow kit with space-saving pipe
- 3½″ InFino basket strainer
- Fixing kit
Needed separately
One trap is needed to connect the sink to the drain. The BLANCO 137267 trap connects the waste kit to a Ø40 or Ø50 mm drain pipe and has a dishwasher connection. With a waste sorter in the cabinet, the flat BLANCO 137287 trap fits, with a Ø50 mm outlet and two appliance connections. The kitchen tap is also bought separately.





Reviews
There are no reviews yet.