Description
Inset stainless steel sink BLANCO LEMIS 8 S-IF
The inset stainless steel sink BLANCO LEMIS 8 S-IF has an IF flat rim, so it can be installed in two ways: with the rim resting on the worktop or flush-mounted level with the worktop. The finish is stainless steel, brushed; the outer size is 1160 × 500 mm and the height 214 mm. The drainer can be placed to the left or right of the bowls during installation. The tap goes on the back edge of the sink, where the tap hole is made at the factory.
Installation on the worktop
For inset installation the cut-out is 1140 × 480 mm (tolerance +2/−1 mm) with 15 mm corner radii. This way the sink also fits laminate worktops, as well as compact laminate, stone, glass, stainless steel and composite worktops, and the IF flat rim looks almost flush on the worktop. The waste outlet sits 322 mm below the top of the worktop.
Flush mounting needs a water-repellent worktop such as granite, glass, artificial stone, glass ceramic or a mineral material, because wood and laminate swell in contact with water. A rebate of 1162 × 502 mm with a 26 mm corner radius and a depth of 1.5–2 mm is milled around the cut-out, leaving a 1 mm gap around the rim. BLANCO recommends leaving flush mounting to a specialist.
Apply a continuous bead of silicone under the rim, set the sink into the cut-out and fix it with the clips, which suit worktops 28–34 mm and 34–40 mm thick. Tighten the clips crosswise with a PZ 2 screwdriver and wipe off squeezed-out silicone straight away. A dishwasher connects to the separately sold trap.
Bowls and drain
Each bowl drain has a 3½″ basket strainer. One bowl’s strainer opens and closes with a rotary knob between the bowls at the front edge; the other bowl’s strainer is opened and closed by hand. The drains of both bowls connect to one trap.
The space-saving pipe of the waste and overflow set routes the waste towards the back of the cabinet and leaves more room under the sink. BLANCO recommends this pipe when a pull-out waste sorter goes under the sink.
Stainless steel and surface finish
The sink is made of 18/10 stainless steel, which contains 18% chromium and 10% nickel. Chromium and oxygen form a thin invisible protective layer on the steel that renews itself. The first fine scratches on a new sink are normal: as the layer renews, many of them become less visible within a few days. Reddish spots on the brushed surface are rust carried over from other rusty objects or water pipes and can be wiped off.
Stainless steel sink care
To avoid small marks, wipe the sink after each use with a soft cloth and a mild cleaning agent along the brushing direction and dry it. Small marks are usually limescale that collects dirt and comes off with a damp cloth. For stubborn limescale, use a descaling stainless steel cleaner with a sponge suitable for stainless steel.
To clean the basket strainers, put a level teaspoon of dishwasher powder on the closed strainer and pour about 250 ml of boiling water over it. Let it work, brush the strainer clean, lift out the insert, clean the holes of the waste bowl and rinse with clean water. Keep chlorine or hydrochloric acid cleaners, long-acting strong salt solutions, steel wool and scrapers away from the sink.
In the box
- Kitchen sink BLANCO LEMIS 8 S-IF, 1 pc
- Waste and overflow set with space-saving pipe
- 2 × 3½″ basket strainers, one with a rotary pop-up knob
Needed separately
To connect the sink to the drain, you need one trap. The BLANCO 137267 kitchen sink trap fits a Ø40 or Ø50 mm drain pipe and also takes a dishwasher connection. With a waste sorter under the sink, the flat BLANCO 137287 trap fits, with a Ø50 mm outlet and two appliance connections. The kitchen tap is bought separately.






Reviews
There are no reviews yet.