Description
Undermount stainless steel sink BLANCO ANDANO 500/180-U
The undermount stainless steel sink BLANCO ANDANO 500/180-U is fixed from below into the worktop cut-out, and its rim rests against the underside of the worktop. The sink has two bowls side by side: a large bowl on the left and a narrow small bowl on the right. The surface has a satin finish (satin polish), the outer dimensions are 745 × 440 mm and the height is 199 mm.
Installation under the worktop
A dense and waterproof material is suitable for the worktop: natural stone, composite or glass. Wood and wood-based board are not suitable for this method of installation. The worktop cut-out measures 705 × 400 mm, with a permitted tolerance of +2/−1 mm and a corner radius of 22 mm.
Six fixing points are drilled into the underside of the worktop 27 mm from the edge of the cut-out: the hole diameter is 5 mm and the depth is 13 mm. Before sealing, the edge of the sink is cleaned with isopropanol, then silicone is applied to the edge, the sink is pressed against the worktop from below and fixed with the screws from the fixing kit, which are tightened with a PZ 2 bit. After removing excess silicone, wait 24 hours before use.
The mixer tap is fitted in the worktop: a 35 mm hole is drilled 60 mm from the edge of the cut-out. The waste outlet is 290 mm below the top surface of the worktop. The dishwasher is connected with a separately sold waste trap.
Bowls, waste and overflow
The bottom of each bowl has a 3½-inch InFino basket strainer, which is opened and closed by hand. The waste of the small bowl connects to the waste pipe of the large bowl, so the sink needs only one waste trap. The back wall of the bowls has a concealed C-overflow, which is part of the InFino waste system. The waste pipe in the set is space-saving: the pipe is routed towards the back wall of the cabinet and more room is left under the sink, which is why BLANCO recommends it together with a pull-out waste sorting bin.
Stainless steel and surface finish
The sink is made of 18/10 stainless steel, which contains 18% chromium and 10% nickel. Together with oxygen, chromium forms a thin and invisible protective layer on the surface that renews itself. Fine scratches that appear on a new sink in the first weeks are normal, and as the protective layer renews, they become less noticeable within a few days.
The satin finish is the finest surface of BLANCO stainless steel sinks, with a warm undertone. A hot pot or long sunshine does not change the tone of the surface. If reddish spots appear on the surface, they are particles carried over from other rusting objects or from water pipes, and they come off when wiped.
Care of the stainless steel sink
For daily cleaning, put a little washing-up liquid on the soft side of a sponge and wipe in the direction of the brushing, because circular movements change the structure of the satin-finish surface. Then rinse the sink and dry it with a microfibre cloth. To remove limescale, use vinegar essence diluted with water at a ratio of 1:10, or a limescale remover.
Once a month, clean the sink thoroughly with a stainless steel cleaner: apply an amount the size of a hazelnut to a sponge and rub the surface in the direction of the brushing. To clean the basket strainers, put a level teaspoon of dishwasher powder on the closed basket strainer, pour about 250 ml of boiling water over it, let it work, brush clean and rinse. Do not use abrasive cleaners, bleach containing hypochlorite, silver cleaning baths, the rough side of a sponge, metal scourers, products containing chlorine or hydrochloric acid, or a strong salt solution left to act for a long time.
Included
- Kitchen sink BLANCO ANDANO 500/180-U, 1 pcs
- Waste and overflow set with space-saving pipe
- 3½″ InFino basket strainer, 2 pcs
- Fixing kit
Needed separately
To connect the sink to the drain you need one waste trap. The waste trap for kitchen sink BLANCO 137267 connects the waste set to a Ø40 or Ø50 mm drain pipe and has a dishwasher connection. If a waste sorting bin is going under the sink, the flat waste trap for kitchen sink BLANCO 137287 is suitable, with a Ø50 mm outlet and a connection for two appliances. The kitchen mixer tap must also be bought separately.






Reviews
There are no reviews yet.