Description
Undermount stainless steel sink BLANCO ZEROX 500-U
The undermount stainless steel sink BLANCO ZEROX 500-U is fixed from below into the worktop cut-out, so the sink rim sits under the worktop. The colour is dark steel (Durinox Dark Steel), the outer size is 540 × 440 mm and the height 184 mm. The sink has one bowl, and its dark grey surface is paired with drain and overflow covers in polished stainless steel.
Installation under the worktop
The sink suits a dense, water-resistant worktop such as natural stone, glass or composite. Wood and wood-based boards are unsuitable for an undermount sink. The worktop cut-out is 500 × 400 mm with a tolerance of +2/−1 mm and a 1 mm corner radius.
The sink is fixed at six points: holes 5 mm in diameter and 15 mm deep are drilled into the worktop 27 mm from the cut-out edge, and the fixing screws are tightened with a PZ 2 screwdriver. Before the sink is raised under the worktop, silicone is applied to its rim, and excess silicone is wiped off after fixing.
The tap is fitted into the worktop: a 35 mm hole is made 65 mm from the cut-out edge.
Bowl, drain and overflow
The bowl has a 3½″ InFino basket strainer that is opened and closed by hand, and a covered overflow (C-overflow). A pull-knob pop-up control can be added with a separately sold retrofit set.
The space-saving pipe of the waste kit runs the drain towards the back of the cabinet, leaving free space under the sink. BLANCO recommends this pipe when a pull-out waste sorter is fitted in the sink cabinet. The dishwasher drain hose connects to the dishwasher connection of the trap.
Stainless steel and surface finish
The sink is made of 18/10 stainless steel, which contains 18% chromium and 10% nickel. Together with oxygen, the chromium forms a thin, invisible protective layer that renews itself. The first fine scratches on a new sink are normal and become less visible as the layer renews.
Durinox is a BLANCO process in which a 1 mm stainless steel sheet is blasted on both sides, so the steel is hardened through and uncoated. The Durinox Dark Steel surface has a hardness of 380 HV, and its dark grey tone comes from a chromium oxide layer that is part of the steel itself and is UV-resistant. The tone stays the same under a hot pot and long sunlight. Reddish spots on the surface are rust carried over from other rusty objects or from the water pipes, and they wipe off.
Stainless steel sink care
For daily cleaning use a soft sponge and a little washing-up liquid or a damp microfibre cloth: clean the sink, rinse and dry it. This way fingerprints and dirt come off easily from the Durinox Dark Steel surface. To clean the basket strainer, put a level teaspoon of dishwasher powder on the closed strainer, pour over about 250 ml of boiling water and let it work, then brush the strainer clean and rinse.
Unsuitable for cleaning the Durinox Dark Steel surface are polishes, scouring cream and powder, acidic cleaners, hypochlorite bleach, silver cleaning baths, cleaners containing chlorine or hydrochloric acid, scratchy sponges, scrapers and steel wool. Rusty iron items such as cast-iron pans can leave marks on the surface after prolonged contact.
In the box
- Kitchen sink BLANCO ZEROX 500-U, 1 pc
- Waste and overflow kit with space-saving pipe
- 3½″ InFino basket strainer
- Fixing kit
Needed separately
One trap is needed to connect the sink to the drain: Kitchen sink trap BLANCO 137267 connects the waste kit to a Ø40 or Ø50 mm pipe and has a dishwasher connection. With a waste sorter under the sink, the flat trap BLANCO 137287 with a Ø50 mm outlet and two appliance connections fits. The kitchen tap is bought separately too.





Reviews
There are no reviews yet.