Description
Undermount stainless steel sink BLANCO CLARON 550-U
The undermount stainless steel sink BLANCO CLARON 550-U is fixed from below into the worktop cut-out, with its rim against the underside of the worktop. It has one large bowl whose tight-radius corners keep the base and walls usable over their whole area. The surface has a satin polish, the outer size is 590 × 440 mm and the height 199 mm.
Undermount installation
The worktop must be a dense, water-resistant material: natural stone, composite or glass. Wood and wood-based boards are not suitable for this installation. The cut-out is 550 × 400 mm, tolerance +2/−1 mm, corner radius 10 mm.
Six fixing points are drilled into the underside of the worktop 27 mm from the cut-out edge: 5 mm in diameter and 15 mm deep. Silicone is applied to the sink rim, the sink is pressed up against the worktop and fixed with the screws of the fixing kit, driven with a PZ 2 bit. Finally, excess silicone is wiped off.
The tap goes into the worktop: the 35 mm hole is drilled 65 mm from the cut-out edge. A dishwasher is connected via the separately sold trap.
Bowl, drain and overflow
The bowl has a 3½-inch InFino basket strainer that is opened and closed by hand. The back wall has a covered C-overflow, part of the InFino drain system. The waste pipe in the kit is space-saving: it runs towards the back of the cabinet and leaves more room under the sink, which is why BLANCO recommends it with a pull-out waste sorter.
Stainless steel and surface finish
The sink is made of 18/10 stainless steel, with 18% chromium and 10% nickel. With oxygen, chromium forms a thin invisible protective layer that renews itself. Fine scratches that appear on a new sink in the first weeks are normal and become less visible within a few days as the layer renews.
Satin polish is the finest surface of BLANCO stainless sinks, with a warm undertone. Hot pots and long sunshine do not change its shade. Reddish spots that appear on the surface are particles from other rusty objects or water pipes and wipe off.
Stainless sink care
For daily cleaning, put a little washing-up liquid on the soft side of a sponge and wipe in the brushing direction, as circular movements change the structure of a satin surface. Then rinse the sink and dry it with a microfibre cloth. To remove limescale, use vinegar essence diluted 1:10 with water, or a descaler.
Once a month, clean the sink thoroughly with a stainless steel cleaner: put a hazelnut-sized amount on a sponge and rub along the brushing direction. To clean the basket strainer, put a level teaspoon of dishwasher powder on the closed strainer, pour about 250 ml of boiling water over it, let it work, brush and rinse. Do not use abrasive cleaners, hypochlorite bleach, silver cleaning baths, the scouring side of a sponge, steel wool, products with chlorine or hydrochloric acid, or strong salt solutions left to act for long.
In the box
- Kitchen sink BLANCO CLARON 550-U, 1 pc
- Waste and overflow kit with space-saving pipe
- 3½″ InFino basket strainer
- Fixing kit
Needed separately
To connect the sink to the drain you need one trap. The trap BLANCO 137267 connects the waste kit to a Ø40 or Ø50 mm drain pipe and has a dishwasher connection. With a waste sorter under the sink, the flat trap BLANCO 137287 fits, with a Ø50 mm outlet and two appliance connections. The kitchen tap is also bought separately.






Reviews
There are no reviews yet.