Description
The built-in Elica Hidden 2.0 cooker hood helps reduce cooking odours and grease in the kitchen
Elica Hidden 2.0 IX/A/72 is a built-in cooker hood that is hidden inside the kitchen cabinet and keeps the worktop visually clean, while effectively removing steam and odours. The perimeter extraction collects air around the edges of the panel, which helps direct steam into the extraction and keeps the kitchen environment more pleasant. Thanks to the A energy class and an annual energy consumption of only 49 kWh, this solution is suitable for everyday use in both smaller and more open kitchens.
Main features
- The built-in design allows the cooker hood to be installed inside the kitchen furniture, so that only the lower panel remains visible and the kitchen looks uniform.
- Perimeter extraction draws steam and odours in through openings along the edge of the panel, which helps improve extraction efficiency and reduce visible grease build-up on the front panel.
- LED lighting 7 W provides even light above the hob, making cooking visually comfortable and energy-saving.
- Powerful airflow of 300–690 m³/h offers both a quieter everyday mode and a stronger “booster” mode when there is more steam and odour.
- Noise level 51–70 dB allows the appliance to be used in open kitchen layouts too, where a balance between extraction power and a comfortable sound level is wanted.
- The extraction version is designed to be connected to a ventilation duct with a diameter of 150 mm, ensuring a stable airflow out of the building.
- The stainless steel finish and silver colour suit a variety of kitchen styles and are easy to maintain.
- Electronic control allows the suitable extraction level and lighting to be selected conveniently and precisely.
Compatibility with kitchen furniture and accessories
This built-in cooker hood is designed for installation in a kitchen cabinet and fits standard-size cabinet modules. The product width is approximately 71.4 cm and the depth 28.2 cm, with a maximum height of up to 367 mm, so it is important to measure the existing cabinet and the location of the ventilation duct before purchase. The standardised width is given as 90 cm, which indicates suitability for a 90 cm wide cabinet row, where the cooker hood covers the hob area well.
Elica Hidden 2.0 IX/A/72 is an extraction version that needs to be connected to a ventilation system. A duct with a diameter of 150 mm is provided for the exhaust air. If connection to ventilation is not possible or if air cleaning through filters is also wanted, the carbon filter CFC0038668 can be ordered separately if desired; it is not included in the standard set.
The type of grease filter of the cooker hood is not specified in the data, but like all kitchen extraction appliances, this model needs regular cleaning and maintenance. How often the grease filter is cleaned or replaced depends on how intensively it is used, and it is worth following the manufacturer’s instructions for use in order to maintain extraction efficiency and reduce the build-up of odours.
Installation and use
During installation, the minimum safe distance between the hob and the cooker hood must be observed: at least 60 cm for a gas hob and at least 50 cm for an electric hob. The cooker hood is connected to a 150 mm ventilation duct, making sure that the duct has as few sharp bends as possible, which could reduce the airflow. It is recommended that the installation be carried out by a qualified specialist.
Thanks to the electronic control, use is easy: choose a lower extraction speed for everyday cooking and a stronger or “booster” mode when there is more steam. The LED lighting is switched on independently of the extraction, so it can also be used as additional worktop lighting. After cooking, it is recommended to leave the cooker hood on a low mode for a while to remove lingering odours and moisture.
When to choose Elica Hidden 2.0 IX/A/72?
Choose Elica Hidden 2.0 IX/A/72 if you are looking for a discreet built-in cooker hood that offers strong airflow of up to 690 m³/h, an energy-efficient A energy class and quality LED lighting. The stainless steel finish, perimeter extraction and the option of connecting a ventilation duct make this model a suitable solution both when planning a new kitchen and when replacing an existing cooker hood, provided the dimensions and ventilation are suitable.


Reviews
There are no reviews yet.