Description
The SONOFF MINI-ZB2GSL-E ZigBee two-channel wall switch without a neutral wire: a convenient way to upgrade an older installation
The SONOFF MINI-ZB2GSL-E ZigBee two-channel wall switch without a neutral wire solves the situation where there is no N wire in the electrical box but you want smart and safe lighting control. The device lets you control two lighting circuits separately both manually and from the app, and supports scenes and schedules. Thanks to the ZigBee 3.0 connection, the switch suits existing smart homes well, and its understated flush-mounted design stays unnoticed in the interior.
Key features
- Installation without a neutral wire: works in a No Neutral scheme and needs no additional capacitor, which simplifies upgrades in older buildings.
- Two independent channels: switch two lighting groups separately and keep fewer keys on the wall and more visual tidiness.
- ZigBee Binding: direct control to another ZigBee device without the cloud allows a quick response even when there is no internet.
- Broad compatibility: works with eWeLink and Home Assistant and supports Amazon Alexa and Google Home voice control. Apple Home is possible through a Matter Bridge.
- Electrical limits: 8 A per channel and up to 12 A in total on a resistive load. A minimum load of 3 W per channel ensures stable operation.
- Suits an EU Ø60 mm box: dimensions of 86 × 86 × 33.7 mm and suitability also for standard 86-type installation boxes.
- Safe construction: flame-retardant PC plastic, overload protection and a long-life relay of up to 100,000 cycles meet the CE and RoHS requirements.
- OTA updates and Power-On State: the software of the device can be updated remotely and the behaviour after a power cut can be set.
Installation without a neutral wire: maximum possibilities
The switch is created for operation without a neutral wire, which makes installation easier in older flats and houses. An additional capacitor is not needed, so the work is quicker and cleaner. The minimum load is 3 W per channel, which ensures stable operation with most ordinary light sources. The device is intended for switching classic lighting and is not compatible with smart bulbs, dimmable bulbs or inductive loads.
Two channels, scenes, schedules and more
The two-channel build allows two independent channels, for example for controlling a ceiling lamp and a wall lamp or two zones in one room. This solution means fewer switches on the wall and a more uniform appearance. The MINI-ZB2GSL-E supports smart scenes and schedules and a timer, to create a suitable routine. The Power-On State function lets you set how the light behaves after a power cut and restoration: it either stays off or switches on with a delay.
ZigBee Binding: quick and reliable local control
The device supports the ZigBee Binding function, which links the switch directly with another ZigBee device, for example a relay or lighting. This way local control takes place without a cloud service, which ensures an instant response and reliability even when there is no internet connection. It works well, for example, in the Home Assistant ZHA or Zigbee2MQTT environment.
Broad compatibility with smart home platforms
The switch works with the eWeLink and Home Assistant app and is compatible with many ZigBee hubs such as the Zigbee Bridge Pro, Zigbee Bridge Ultra, iHost and NSPanel Pro and the popular dongles ZBDongle-P and ZBDongle-E, Dongle Plus MG24 and Dongle Lite MG21. Amazon Alexa and Google Home allow voice control. Apple Home integration is possible through a Matter Bridge if you use a compatible Matter gateway, for example in the eWeLink CUBE ecosystem. The MINI-ZB2GSL-E works as a ZigBee end device and does not act as a network router.
Safety, durability and easy installation
The housing is made of flame-retardant PC plastic and there is overload protection and a long-life relay of up to 100,000 cycles. The device meets the CE and RoHS requirements and suits standard 86-type installation boxes and European round Ø60 mm boxes. Set-up is done in a few steps in the eWeLink app and a suitable ZigBee central device is required for operation. Software OTA updates keep the functions fresh without removing the switch.
In the set
The box contains the wall switch, fixing screws and a short user manual, so you can start installing right away.
Compatibility and requirements for everyday use
The switch uses the ZigBee 3.0 protocol and needs a compatible central device for operation, for example a bridge of the eWeLink ecosystem or Home Assistant ZHA or Zigbee2MQTT with a supported dongle. The device is a ZigBee end device that does not extend the network. If needed, ZigBee Binding links can be added, so that critical light fittings work without the cloud.
The electrical limits are clear, to ensure reliability. The minimum load is 3 W per channel and the maximum is 8 A per channel, up to 12 A in total on a resistive load. The switch does not support dimming and is not intended for smart bulbs or inductive loads. The operating temperature stays in the range of -10 to 40 °C, which covers most indoor conditions.
Voice control works with Amazon Alexa and Google Home. For Apple Home integration a Matter Bridge and a compatible Matter gateway are needed. In the app you can also set up scenes, schedules and Power-On State to determine the behaviour of the light after a power cut.
Installation and instructions for use in brief
Before starting work, switch off the electrical fuse and make sure the voltage has been removed. Connect the live L to the input and the loads to the outputs L1 and L2 according to the two lighting circuits. The device works without an N wire and needs a minimum load of 3 W per channel. Install the switch in a standard 86-type or EU Ø60 mm box and fasten it with the screws supplied.
After restoring power, add the switch to your ZigBee central device in the eWeLink app or in Home Assistant following the instructions of the app. If necessary, create ZigBee Binding links to ensure local and quick control. In the app you can set up scenes, timers and the Power-On State behaviour. For maintenance, wipe the surface with a dry soft cloth and keep the device away from moisture and excessive heat.
In the set
- SONOFF MINI-ZB2GSL-E two-channel ZigBee wall switch without a neutral wire
- Fixing screws for installation
- User manual for a quick start
Upgrade lighting smartly and safely
If you are looking for a solution that would work even without an N wire and let you control two lighting circuits smartly, the SONOFF MINI-ZB2GSL-E offers a balance between simple installation and flexible automation. Local control with ZigBee Binding reduces delay and raises reliability, and broad platform compatibility gives the freedom to choose the app that suits you. Thanks to the Power-On State settings, use is convenient and safe even after power cuts. Choose a practical upgrade that saves time and keeps the wall aesthetic without running additional wires.




Reviews
There are no reviews yet.