Description
The SONOFF MINI-ZB2GS-E ZigBee 3.0 two-channel wall switch for smart and reliable lighting control
If you want to control two lighting circuits from one place without adding separate wiring, the SONOFF MINI-ZB2GS-E ZigBee 3.0 offers a practical solution. The switch lets you manage two channels separately both from the button and from the app, and also works as a ZigBee router, to strengthen the home mesh network. Thanks to scenes, schedules and a safe build, it suits both a flat and a larger household, keeping the wall plate clean and everyday use simple.
Key features
- Two independent channels let you control, for example, a ceiling light and a table lamp separately, reducing the number of switches on the wall and keeping the installation uniform.
- The ZigBee router extends and strengthens the mesh network, the ceramic antenna and improved operating modes help to reduce delays and improve reliability in larger homes.
- Detach Relay keeps smart bulbs permanently powered, so they do not drop out of the network’s view even when you use the wall switch.
- Scenes and schedules adapt the lighting to your rhythm, Power-On State and delayed switch-on help to avoid unexpected switching on after a power cut.
- Voice control works with Amazon Alexa and Google Home, Apple Home support is possible through a Matter Bridge if you use a compatible gateway solution.
- Home Assistant support through ZHA and Zigbee2MQTT, works with the eWeLink app and is compatible with many ZigBee bridges and dongles.
- A fire-resistant PC housing, overvoltage and overheating protection and up to 100,000 switching cycles ensure durability, CE and RoHS confirm compliance with the requirements.
- EU Ø60 mm box and Type 86 suitability, supply 110 to 240 V~, 50 to 60 Hz, up to 10 A per channel and 16 A in total with a resistive load.
A closer look
Contemporary design and smart control
The MINI-ZB2GS-E is a contemporary two-channel ZigBee 3.0 wall switch that allows quick and safe control of lighting and other circuits. Both channels can be configured independently, scenes and schedules added, and the Detach Relay mode used. The device works in the ZigBee network as a router, which helps to extend the range and strengthen the connection throughout the home. The compact surface-mounted installation keeps the exterior look clean and minimalist.
Stable ZigBee 3.0 communication and two independent channels
The device uses the ZigBee 3.0 protocol to ensure low latency and reliability. Since the switch acts as a ZigBee router, the home mesh network strengthens and expands. The ceramic antenna and improved operating mode increase the stability of the connection, which is especially useful in larger homes. Two independent channels let you control two circuits separately and set up separate automations and scenes for them.
Detach Relay for smart bulbs and direct binding
Detach Relay means that the physical button does not interrupt the power but sends a control command. This way smart bulbs do not drop out of the network view after the wall switch is used. In addition, the ZigBee Binding function can be used, to link the switch directly with another ZigBee device without a cloud service, which ensures an instant response even in the event of a temporary internet outage.
Scenes, schedules and smart automations
You can create scenes, for example for switching the light on automatically when motion is detected, or set a delay for switching on. Power-On State lets you set the behaviour of the device when power is restored, and the delay prevents unwanted switching on after an interruption. Schedules and timers adapt the operation of the lighting to the rhythm of the home day, increasing convenience and a sense of security.
Broad compatibility with apps and hubs
The device works with the eWeLink app and is compatible with the Home Assistant platform both through ZHA and Zigbee2MQTT. Several ZigBee hubs and dongles are supported, for example ZBBridge-P, ZBBridge-U, NSPanel Pro, iHost, ZBDongle-P or E and Dongle MG24 and MG21. Voice control is available through Amazon Alexa and Google Home, Apple Home support is possible with the help of a Matter Bridge if you use a compatible gateway such as the eWeLink CUBE.
Safety, durability and easy use
The housing made of fire-resistant PC plastic, overvoltage and overheating protection and a long-life relay of up to 100,000 cycles suit everyday use. CE and RoHS confirm compliance with the requirements. The switch suits a Type 86 installation box and a European Ø60 mm round box. Set-up is done in the eWeLink app in a few steps, a compatible ZigBee hub is required. OTA updates allow improvements without taking the device apart.
Compatibility, hubs and network requirements
The MINI-ZB2GS-E works with the eWeLink app and is compatible with the Home Assistant environment through ZHA and Zigbee2MQTT. Voice control is supported on the Amazon Alexa and Google Home platforms. To add to Apple Home a Matter Bridge and a corresponding environment such as the eWeLink CUBE are needed.
A ZigBee hub or USB dongle is required for operation. Supported, among others, are the SONOFF ZBBridge-P and ZBBridge-U, NSPanel Pro, iHost and dongles such as the ZBDongle-P and ZBDongle-E, Dongle Plus MG24 and Dongle Lite MG21. After pairing, control works locally, and ZigBee Binding allows direct binding of the button with other ZigBee devices even without the cloud. Cloud functions and voice control need an internet connection.
The electrical ratings are 110 to 240 V~ and 50 to 60 Hz. The maximum current is 10 A per channel and up to 16 A in total with a resistive load. The dimensions of the switch are 86 × 86 × 33.7 mm and it fits inside a Type 86 installation box and a European round Ø60 mm box.
Installation and use
Before starting, make sure the power is switched off and the circuit is de-energised. Choose a suitable installation box, Type 86 or EU Ø60 mm, and connect the wires to both channels according to the terminal markings. Fasten the switch in the box and check that the cabling is firmly fixed. Switch the power on and add the device to the eWeLink app following the on-screen instructions and pair it with your ZigBee hub. After pairing, set up scenes, schedules and, if needed, the Detach Relay mode for smart bulbs. If necessary, update the firmware via OTA. Electrical work may be done only by a competent specialist in accordance with local requirements.
In the set
- SONOFF MINI-ZB2GS-E two-channel ZigBee wall switch
- Installation screws
- User manual
Take lighting under control
Choose the SONOFF MINI-ZB2GS-E if you need a reliable way to control two circuits from one switch and at the same time strengthen the home ZigBee network. Broad compatibility, scenes and schedules and a safe build help to save time, keep a uniform interior and add smartness without complicated rebuilding.



Reviews
There are no reviews yet.