Description
Kitchen mixer tap with top lever BLANCO WEGA II
Kitchen mixer tap BLANCO WEGA II is a single-lever tap with the lever on top of the body, so flow and temperature are set with one hand. The colour is black/chrome: the body and spout are black, the lever and rings are chrome. A high-pressure (HD) tap suits kitchens where both cold and hot water pipes come out of the wall.
Spout and flow rate
The tap is 188 mm high overall and the spout reach is 215 mm. The flow rate at 3 bar is 15.51 l/min. The spout delivers an aerated jet formed by the aerator screwed into its end. BLANCO’s aerator is designed so that less limescale builds up on it.
Installing the sink mixer and water pressure
The tap fits a 35 mm hole in the sink or worktop and is secured from below with a nut; the mounting surface can be up to 50 mm thick. The flexible connection hoses are 500 mm long with a ⅜″ nut. When fitting the tap into a stainless steel sink, use the stabilising plate, which makes the mounting more rigid.
The tap works at mains pressure up to 10 bar and hot water up to 70 °C. An open, unvented boiler under the sink needs a low-pressure (ND) tap with three hoses. Only a low-pressure tap can replace a low-pressure tap, because the number of hoses differs.
Flush the supply pipes before connecting the hoses. The hoses are tightened onto the angle valves with a 19 mm spanner. Before first use, unscrew the aerator with a 22 mm spanner, run the water for at least 20 seconds, check the joints for leaks and refit the aerator.
Finish and sink colour
The brass body has a SILGRANIT-look finish whose colours BLANCO matches to its SILGRANIT sinks. The black-bodied tap matches a black BLANCO SILGRANIT sink.
Tap care
After use, dry the tap with a microfibre cloth. To remove limescale, spray a descaler onto the surface, leave it for a moment, wipe with a damp cloth and dry. Use the soft side of a sponge and keep chlorine cleaners and the scouring side of a sponge away from the tap.
If the jet starts to spray, unscrew the aerator anticlockwise and soak it overnight in vinegar water or citric acid. With old water pipes, BLANCO recommends fitting a dirt filter between the angle valve and the connection hose. BLANCO states that spare parts for its taps are available for at least 10 years.
In the box
- Kitchen mixer tap BLANCO WEGA II, 1 pc
- Flexible connection hoses, 500 mm, with ⅜″ nut
- Stabilising plate for fitting the tap into a stainless steel sink
Needed separately
To connect the tap to the water supply you need hot and cold angle valves under the sink to which the ⅜″ hose nuts connect.




Reviews
There are no reviews yet.