Description
Transparent PLA filament for FDM printers
The red transparent PLA filament suits FDM printers, including Bambu Lab, Creality, Prusa and Anycubic models. The filament is intended for printing decorative items, figurines, accessories, toys and lighting fixtures.


Print settings by speed
At 50–100 mm/s the nozzle temperature is 205–215 °C, and at 100–200 mm/s it is 215–245 °C. The bed temperature is 50–60 °C and a textured PEI plate needs no surface treatment. The cooling fan stays on while printing and retraction is 0.8–1.2 mm at 30–40 mm/s. PVA can be used as support material.

Material properties
A printed test specimen has a tensile strength of 46 ± 5 MPa, a bending strength of 83 ± 5 MPa and an elongation at break of 10 ± 2.5%. The heat deflection temperature is 56 ± 3 °C and the Vicat softening temperature 54 °C. Shrinkage is 0.1–0.3%, density 1.21 g/cm³ and the melting temperature 164 °C.

Drying and storage
Dry filament that has absorbed moisture at 50 °C. Keep the filament out of direct sunlight, as UV radiation can turn it yellow.






Reviews
There are no reviews yet.